G243M CompactPCI Serial 4-Port 2.5 Gigabit Ethernet Interface Board with PoE Industrial High-Speed Board with M12 X-Coded Connectors Rugged CompactPCI Serial interface board with four Ethernet ports supporting 10/100/1000 and 2.5 Gigabit speeds, M12 X-coded connectors, PoE, and IEEE 1588v2, AVB and TSN for industrial and railway systems. 4x 2.5 Gigabit Ethernet Board The G243M Ethernet interface board is a 3-speed (100/1000BASE-TX/2.5GBASE-TX) rugged single CompactPCI Serial peripheral board. It can be used in combination with a CompactPCI Serial CPU board in a 19" CompactPCI Serial system. It provides four 2.5 Gigabit Ethernet interfaces at the front panel which can be accessed on four M12 X-coded connectors. Each interface is controlled by an individual 2.5G Ethernet controller which supports IEEE1588v2/PtP Timing Protocols, AVB and TSN. Designed for Railway Applications The G243M is designed for the extended operating temperature and is coated for use in harsh mobility environments, in particular for rolling stock applications. Four 2.5 Gigabit Ethernet channels 100/1000BASE-TX / 2.5GBASE-TX supported Power over Ethernet (PoE+) PSE (all ports) IEEE1588v2/PtP Timing Protocols, AVB and TSN supported M12 X-coded connectors -40 °C to +85 °C operating temperature PICMG CPCI-S.0 CompactPCI Serial peripheral card

RIO3 Remote I/O Expansion Modules for Railway Applications EN50155-Compliant RS485 Connectivity for HVAC, Monitoring and Train Control Modular RIO3 Remote I/O expansion modules for railway applications including HVAC, condition monitoring, fire protection, power packs and door control. EN50155-compliant design with RS485 isolated communication enables flexible, scalable onboard integration. Custom configurations available using PC3 module combinations. Applications The RIO3 I/O modules support applications like Passenger Vehicle Condition Based Monitoring, HVAC Control Systems or onboard controls for fire protection, power packs and doors. Flexible Design for Railway Subsystems If the standard PC3 does not cover all I/O needs for your configuration, duagon can create a RIO3 Remote I/O module, which will work as slave system and will communicate with the Master Controller via a RS485 isolated port. RIO3 is also suitable when is more convenient to allocate the I/O module close to the actuators in the train configuration. I/O Modules To create the RIO3 Remote I/O module, up to nine PC3 I/O modules can be selected and combined. Once you have chosen your configuration, the RIO3 is quickly manufactured resulting in a railway compliant product. Our wide range of certified off-the-shelf modules are listed in the following table. If your requirements are slightly different to our standard product offering, we can provide our ISO 9001 accredited design services to customize the RIO3 Remote I/O module to suit your application. Designed for railway applications Wide range of I/O options High-level I/O integration enables complex control RS485 isolated port for connection with the Master Controller Scalable design for easy configuration adaptation Suitable for nominal battery voltages of 24 V DC Connections via cage clamp plug socket connectors Operating temperature range: -40 °C to +70 °C (+85 °C for 10 minutes) EN 50155 compliant

PU35 Railway CompactPCI Power Supply Unit 24 to 110 VDC, 250 W (3U) EN 50155 Compliant PSU for Reliable Onboard and Wayside Operation Wide-range railway power supply unit (PSU) 24–110 VDC, 250W. EN 50155 compliant CompactPCI (cPCI) 3U solution for reliable operation in train, rolling stock and wayside systems Designed for Rail Applications, Vehicle and Wayside The PU35 is a plug-in power supply unit for 19" systems (e.g., CompactPCI). It is especially designed for computer systems in public transport vehicles and for harsh environments, like railway applications, making it suitable for both rolling-stock and wayside use. Wide-Range Input The PU35 has a nominal input power range of 24 V DC to 110 V DC with a max. input voltage range of 15 V DC to 154 V DC (according to EN 50155 and S-9401). The undervoltage threshold is configurable via rotary switch for the nominal voltages of 24, 36, 48, 72, 96, 110 V DC and 74 V DC. Advanced Power Supply Functionality The standard output voltage is 12.6 V DC. The PU35 also has a standby voltage of 5 V DC with 5 W to supply the independent shelf controller, and to support wake-on-LAN functionality. The standby voltage is always on. The PSU also features overvoltage protection, overcurrent protection and overtemperature protection. Rugged Design The PSU is coated conformally, and all components are secured against vibration. In case of an error, the voltage is powered down. The thermal stress is extremely low due to integrated heat sinks and diversion of dissipated heat over the mounting surface. The PU35 is compliant with EN 50155, operating in the temperature range from -40 °C to +70 °C (10 min @ +85 °C). 3U, 12 HP, 19" rack mountable Wide range input 24 V DC to 110 V DC nominal Configurable undervoltage via rotary switch Output power without derating Hold up time 10 ms (EN 50155 Class S2) H15 rear connector -40 °C to +70 °C (+85 °C) Conformal coating Input voltage according to S-9401 EN 50155 compliance

PC2220 PC2 Programmable Controller for Rail Vehicles Programmable Digital I/O Controller with optional LCD and Keypad For Railway Applications on Rail Vehicles The PC2200 is a compact programmable controller for railway applications on rail vehicles. It features 16 digital input channels and 14 digital output channels. It also supports the following optional tools: a tactile 12-key keypad and a backlit 2x20 character LCD. Robust Wired Communication The PC2200 Series provides one galvanically isolated 10/100Mbit Ethernet interface on an M12 connector. It also provides one non-isolated RS232 serial port on an RJ12 connector and one non-isolated 3-wire RS485 serial port for communication. Solid Processing Performance The PC2200 features an NXP® Vybrid™ VF50N processor. It features up to 128 MB NAND flash, 128 MB DDR3 RAM, and 128 kB non-volatile MRAM. Ease of Programming The PC2200 is programmable via iecTeso IEC61131-3 environment as well as “C” programming language. Fanless Operation The PC2200 is designed for fanless operation at temperatures from -40 °C to +70 °C (+85 °C for up to 10 minutes). Rail Rolling Stock Compliant The PC2200 is exclusively designed for harsh rolling stock environments and conforms to the EN 50121 / EN 50155 / EN 61373 standards. 16 digital inputs, 14 digital outputs One 10BASE-T/100BASE-TX Ethernet interface One RS232 serial communications port One RS485 serial communications port Optional tactile 12-key keypad and backlit 2x20 character LCD Rapid application development with IEC 61131 PLC or C-API programming EN 50155 compliant

PC2613 PC2 Configurable I/O Controller with RS485 (HDLC) Programmable Universal I/O Controller with HDLC/RS485 Interface Configurable industrial controller with high-level data link control (HDLC) protocols for industrial control systems, rail locomotive performance and HVAC systems. Programmable Controller The PC2613 is a EN 50155 compliant, software configurable programmable controller supporting one isolated RS485 port (HDLC Slave). It is suitable for railway applications on rail vehicles. The PC2613 has been proven to survive the rigors required for railway vehicles including electrical surges and transients (EN 50155/EN 50121-3-2), shock and vibration (EN 50155/EN 61373), an operating temperature of -40 °C to +70 °C and a relative humidity of 5% to 95% non-condensing. Applications Passenger Vehicle Condition Based Monitoring Heating Ventilation Air Conditioning (HVAC) Control Systems Onboard controls for fire protection, power packs and doors Locomotive Performance and Condition Monitoring Trackside Monitoring and SCADA Industrial Control Systems Six software configurable analog inputs Sixteen software configurable digital inputs Sixteen low-side (sinking) digital outputs Three software configurable universal inputs (analog or digital) Two software configurable universal outputs (analog or digital) Remote I/O Expansion through isolated RS485 port MicroSD card interface Suitable for nominal battery voltages of 24 VDC in accordance with EN 50155 Operating temperature range: -40 °C to +70 °C (+85 °C for 10 minutes). Conformal Coating

PC2612 PC2 Configurable I/O Controller with CANopen Programmable Universal I/O Controller with CANopen Interface Programmable industrial controller with customizable analog and digital inputs/outputs, perfect for industrial control systems like HVAC and rail passenger vehicle monitoring. Programmable Controller The PC2612 is a EN 50155 compliant, software configurable programmable controller supporting up to two independent CAN networks with each network capable of supporting CANopen Master and CANopen Slave. It is suitable for railway applications on rail vehicles. The PC2612 has been proven to survive the rigors required for railway vehicles including electrical surges and transients (EN 50155/EN 50121-3-2), shock and vibration (EN 50155/EN 61373), an operating temperature of -40 °C to +70 °C and a relative humidity of 5% to 95% non-condensing. Applications Passenger Vehicle Condition Based Monitoring Heating Ventilation Air Conditioning (HVAC) Control Systems Onboard controls for fire protection, power packs and doors Locomotive Performance and Condition Monitoring Trackside Monitoring and SCADA Industrial Control Systems Six software configurable analog inputs Sixteen software configurable digital inputs Sixteen low-side (sinking) digital outputs Three software configurable universal inputs (analog or digital) Two software configurable universal outputs (analog or digital) Remote I/O Expansion through isolated RS485 port MicroSD card interface Suitable for nominal battery voltages of 24 VDC in accordance with EN 50155 Operating temperature range: -40 °C to +70 °C (+85 °C for 10 minutes). Conformal Coating

D650 Passive Ethernet TAP The D650 is a passive Ethernet terminal access point (TAP) to monitor up to two 100 Mbit/s Ethernet network lines ensuring non-retroactivity. The Ethernet TAP is capable of mirroring all network traffic on up to two 100 Mbit/s Ethernet interfaces. The network traffic is forwarded – without modification – to the monitor port. The monitor port offers a 1 Gbit/s Ethernet interface, providing enough bandwidth to aggregate two 100 Mbit/s interfaces without packet loss. The D650 can be powered directly from the battery and supports nominal battery voltages from 24 to 110 VDC. Alternatively, the device may be powered over Ethernet via the monitor port. The D650 is exclusively designed for harsh rolling stock environments and complies with the EN 50155 standard. Passive Ethernet terminal access point (TAP) with guaranteed non-retroactivity down to the physical layer Monitors up to two 100 Mbit/s Ethernet network lines Power-over-Ethernet (Powered Device) capable -40 °C to +70 °C operating temperature

G501N SATA HDD/SSD Shuttle 3U CompactPCI Serial The G501N is a CompactPCI Serial hard disk drive carrier board designed to carry a 2.5" SATA hard disk drive or a solid state drive. 2.5" HDD or SSD The G501N is a CompactPCI Serial hard disk drive carrier board. It is designed to carry a 2.5" SATA hard disk drive or a solid state drive. Front Panel Status LEDs The unit's front panel features LEDs that signalize the board's SGPIO status while a fourth indicates the status of the internal controller's power supply. Suitable for Railway Applications Its compliance with the EN 50155 standard makes the board suitable for use in railway applications. Hard disk drive or solid state drive shuttle 2.5" SATA HDD/SSD slot Four status LEDs -40 °C to +85 °C Compliant with EN 50155 (railways) PICMG CPCI-S.0 CompactPCI Serial peripheral card

F229 LTE Wireless High-Speed Network Interface Board 3U CompactPCI Carrier board with PCI Express mini card slots, antenna connectors and micro-SIM card sockets for connecting to cellular networks through LTE, WLAN, GNSS for wireless train communication applications. Three Slots for Wireless Functionality The F229 is a rugged single slot CompactPCI carrier board for up to three PCI Express Mini Cards. The slots can be used for LTE, GNSS or WLAN modems. Two antenna slots for different types of antenna connectors are provided for each PCI Express Mini Card slot. One PCI Express Mini Card slot is by default equipped with an LTE/GNSS module and two RP-SMA antenna connectors/cables. For Train Connectivity and Fleet Management The F229 provides connectivity solutions to cellular networks by adding LTE, LTE Advanced or other types of wireless modems. It is intended for use in various train connectivity applications including onboard WLAN, passenger infotainment and fleet management systems. In the train communication system architecture, the F229 is typically located at the front end where it communicates directly with a cellular network. To optimize the connection and network coverage, the F229 features ten micro-SIM card slots. Remote Control by Software duagon provides a user friendly software tool designed for interacting with the F229. The user is able to remotely control which micro-SIM cards are connected to the modems. Remote power reset is also possible for each modem. Suited for Mobility Applications in Harsh Environments The F229 is designed for -40 °C to +85 °C operating temperature and conformal coated in order to be used also in transportation applications in harsh environments. The final environmental qualification depends on the respective PCI Express Mini Cards used with the carrier. 1 LTE/GNSS modem 1 PCI Express Mini Card slot for LTE, LTE Advanced, GNSS 1 PCI Express Mini Card slot for WLAN, GNSS 2 external antennas per module 10 micro-SIM card slots Software tool for switching SIM cards and remote power up/down of modems -40 °C to +85 °C, conformal coating

G239 5G Wireless High-Speed Network Interface Board 3U CompactPCI Serial Network interface cPCI card for IoT communication modules with M.2 and PCI Express slots for 5G cellular networks, WLAN, GNSS and other primary wireless technology Three Slots for Wireless Functionality The G239 is a rugged CompactPCI Serial carrier board providing 5G mobile communication features to 19" Systems. It offers two M.2 slots for 5G and one PCI Express Mini Card slot for WLAN. For 5G functionality, the board is equipped with eight QLS antenna connectors (four connectors for each M.2 card) as well as up to two QLS antenna connectors for WLAN functionality. A high-precision GNSS receiver is also provided. Made for Train Communication Together with a powerful CPU it features a lot of application possibilities, in particular for the railway market. Some of these are Internet-on-board, general backoffice communication, live CCTV to control centers or predictive maintenance. In the train communication system architecture, the G239 is typically located at the front end where it communicates directly with a cellular network. To optimize the connection and network coverage, the G239 features eight micro-SIM card slots. Remote Control by Software duagon provides a user-friendly software tool designed for interacting with the G239. The user is able to remotely control which micro-SIM cards are connected to the modems. Remote power reset is also possible for each modem. Suited for Mobility Applications in Harsh Environments The G239 is designed for -40 °C to +85 °C operating temperature and comes with conformal coating for use also in harsh and mobile environments. The final environmental qualification depends on the respective modem cards used with the carrier. Long-term availability ensures an extended product life and future-safety. This Product is Coming Soon duagon has replaced EOL parts on the G239 to ensure ongoing safety and compliance. Product available as soon as their conformity assessments are complete. 2 M.2 card slots for 5G 1 PCIe Mini Card slot for WLAN 1 high-precision GNSS receiver 8 micro-SIM card slots Software tool for switching SIM cards and remote power up/down of modems -40 °C to +85 °C, conformal coating