A203N M-Module Carrier Board for 4 Mezzanine Cards 6U VME64 The A203N is an M-Module carrier board for universal I/O on the VMEbus, allowing high flexibility in applications such as process and motion control, measurement and instrumentation, communication or special-purpose tasks. The A203N is an M-Module carrier board for universal I/O on the VMEbus, allowing high flexibility in applications such as process and motion control, measurement and instrumentation, communication or special-purpose tasks. The M-Modules are screwed tightly on the carrier board, and the board needs only one slot on the VMEbus. The A203N is a VME64 slave card and supports four D16/D32 M-Modules with the signals either at the front or via rear I/O. An interrupt controller handles the M-Modules individually. For rugged requirements the A203N is equipped with a stiffener front panel, allows a standard -40 °C to +85 °C operation temperature and is prepared for conformal coating. Additionally, the A203N is prepared for DMA transfer support. 4 M-Module slots 1 VME64 slave slot 7-level interrupter -40 °C to +85 °C

A21C Embedded Single Board Computer, QorIQ P1xxx, PMC/XMC 6U VME64 The A21C is a PowerPC based embedded computer for industrial automation. The SBC features an NXP single-core P1013 or dual-core P1022 QorIQ processor and PMC / XMC mezzanine slots. The A21C is an NXP (formerly Freescale) QorIQ based single-board computer for embedded industrial applications. The SBC features full VME64 support and can be used as a master or a slave in a VMEbus environment. The A21C provides 1 MB local dual-ported SRAM for slave access and communication between the local CPU and another VMEbus master. The CPU card comes with a single-core P1013 or dual-core P1022 QorIQ processor with up to 1.067 GHz clock frequency and a serial communication architecture. With two Gigabit Ethernetports and one RS232 COM at the front, and DDR3 SDRAM with ECC, Flash and FRAM, the board offers the crucial basics of an industrial computer. To satisfy your needs for mass storage, you can use microSD cards and mSATA plug-in modules. In addition, the A21C can be equipped with up to two XMC or PMC mezzanine cards on shared sites, providing both front I/O (XMC/PMC) and rear I/O (PMC) for functions such as graphics, mass storage, or further Ethernet. The two PMC slots support modules up to 64-bit/133-MHz PCI-X, while the XMC slots are powered by two PCI Express x1 links each. The modular combination of I/O functionality on a single-board computer allows to build up tailored control systems which appear as customized solutions based on standard components. Its sister card, the A21B, offers three M-Module slots instead of XMC/PMC, which are ideal for process I/O requirements. Where there's a need for even more or other I/O, the A21C also includes a custom I/O mezzanine card option that reduces the board by one PMC/XMC slot but provides interfaces like USB 2.0, COM or even custom I/O controlled by the onboard FPGA. The mezzanine card is always an entirely customized adapter PCB, including front I/O, and makes the A21C a semi-custom solution. The A21C supports operation in a -40°C to +85°C temperature range, and the board withstands shock and vibration. The CPU board is supported by the U-Boot Universal Boot Loader, which can be used for bootstrapping operating systems, for hardware testing, or for debugging applications without running any operating system. NXP PowerPC QorIQ P1013, 800 MHz Up to dual-core P1022, 1.067 GHz 64-bit VMEbus master and slave Up to 2 GB DDR3 DRAM soldered, ECC Up to 64 MB Flash and 128 KB FRAM microSD card and mSATA slot 2 Gb Ethernet, 1 COM, additional I/O options 2 PMC/XMC slots U-Boot Universal Boot Loader -40 °C to +85 °C

A21B Embedded Single Board Computer, QorIQ P1xxx, M-Modules 6U VME64 The A21B is a PowerPC based embedded computer for industrial automation. The SBC features an NXP single-core P1013 or dual-core P1022 QorIQ processor and M-Module mezzanine slots. The A21B is an NXP (formerly Freescale) QorIQ based single-board computer for embedded industrial applications. The SBC features full VME64 support and can be used as a master or a slave in a VMEbus environment. The A21B provides 1 MB local dual-ported SRAM for slave access and communication between the local CPU and another VMEbus master. The CPU card comes with a single-core P1013 or dual-core P1022 QorIQ processor with up to 1.067 GHz clock frequency and a serial communication architecture. With two Gigabit Ethernet ports and one RS232 COM at the front, and DDR3 SDRAM with ECC, Flash and FRAM, the board offers the crucial basics of an industrial computer. To satisfy your needs for mass storage, you can use microSD cards and mSATA plug-in modules. In addition, the A21B can be equipped with up to three M-Module mezzanine cards supporting both front I/O and rear I/O. M-Modules are ideal for real-world I/O like analog/binary process and instrumentation input/output. The modular combination of I/O functionality on a single-board computer allows to build up tailored control systems which appear as customized solutions based on standard components. Its sister card, the A21C, offers two PMC/XMC slots instead of M-Modules, for different I/O requirements. Where there's a need for even more or other I/O, the A21B also includes a custom I/O mezzanine card option that reduces the board by one M-Module but provides interfaces like USB 2.0, COM or even custom I/O controlled by the onboard FPGA. The mezzanine card is always an entirely customized adapter PCB, including front I/O, and makes the A21B a semi-custom solution. The A21B supports operation in a -40 °C to +85 °C temperature range, and the board withstands shock and vibration. The CPU board is supported by the U-Boot Universal Boot Loader, which can be used for bootstrapping operating systems, for hardware testing, or for debugging applications without running any operating system. NXP PowerPC QorIQ P1013, 800 MHz Up to dual-core P1022, 1.067 GHz 64-bit VMEbus master and slave Up to 2 GB DDR3 DRAM soldered, ECC Up to 64 MB Flash and 128 KB FRAM microSD card and mSATA slot 2 Gb Ethernet, 1 COM, additional I/O options 3 M-Module slots U-Boot Universal Boot Loader -40 °C to +85 °C

A25 Embedded Single Board Computer with Intel Xeon D 6U VMEBus for Industrial Applications The A25 is a high-performance multicore processor VMEbus CPU board based on Intel's Xeon D-1500 server CPU. Latest Intel Xeon Technology The A25 is a high-performance multicore VMEbus CPU board based on Intel's Xeon D-1500 server CPU. The VMEbus interface is implemented as an open-source, FPGA-based solution. This makes it both future-proof and cost-efficient with comprehensive functionality. The A25 supports a reduction of system size, a reliable long-term operation without forced air cooling, and manifold computing functions with just one computer board. Versatile Front I/O and Mass Storage With two USB ports, three Gigabit Ethernet ports and two RS232 COMs at the front, the board offers the crucial basics of a multi-purpose industrial computer. Being equipped with DDR4 SDRAM with ECC and Flash, the need for flexible mass storage extensions is covered by slots for microSD and mSATA. Flexible Interfaces via PMC/XMC In addition, the A25 can be equipped with one XMC/PMC mezzanine card and one PCI Express Mini Card, providing additional front I/O (XMC/PMC) for functions such as graphics, mass storage, or further Ethernet. The PMC slot supports modules up to 64-bit/133-MHz PCI-X, while the XMC slot is controlled by one PCI Express x8 link. The modular extension with I/O mezzanines on a single-board computer allows to configure tailored systems from open standard components, reducing integration time and cost. Designed for Harsh Environments The A25 supports operation in a -40 °C to +60 °C temperature range. The rugged board withstands shock and vibration as all components on the board are soldered, which is a prerequisite for reliable operation and a longer product life-time. Demanding Markets The A25 is a computer board well suited for critical embedded applications, especially in the industrial automation and power & energy markets, for example as the central safety platform for power plants. Intel Xeon D-1500 (Broadwell DE) Up to 16 cores and 32 threads 64-bit VMEbus master and slave interfaces Up to 32 GB DDR4 DRAM soldered, ECC Front I/O: 3 Gb Ethernet, 2 USB 3.2 Gen 1x1, 2 COM Rear I/O: 2 Gb Ethernet 1 PMC/XMC slot Trusted Platform Module (TPM)

DC15 Rugged 10.4" Panel PC with Front Keys or Touch Screen UIC 612 Railway Display Computer The DC15 is a rugged, fanless and maintenance-free human-machine interface (HMI) for the train driver cabin desk, interfacing for example as display control unit of the Computer Based Train Control system (CBTC) to the Automated Train Operation system (ATO). Robust Panel PC for Interactive Rail Applications The DC15 panel PC is a rugged, fanless and maintenance-free human-machine interface (HMI) for railway applications. It features a 10.4" display and a projected capacitive touch screen or 32 illuminated front keys. Its small, ultra-flat mechanical design and configuration options save space in the driver cabin and allow the panel to be tailored for all types of applications in different train models. In addition, its full software compatibility with the 12.1" DC17 panel PC both increases flexibility and lowers costs, e.g., if an upgrade to a larger panel is necessary. High-Quality, High-Resolution Display The DC15 houses a robust impact-resistant XGA TFT LCD display with LED backlight, and features high illumination intensity. This ensures good readability, even when exposed to sunlight. It also features a buzzer for alarm purposes, as well as LEDs and a light sensor at the front. Due to its high resolution and optimized usability, it is a perfect choice for applications like CCTV. Powerful & Energy-Efficient Computing Built around a T40E AMD Dual Core processor with 1.0 GHz, the DC15 is equipped with 2 GB RAM and a 16 GB mSATA disk. Standard interfaces include two Fast Ethernet, one USB, one CAN, one audio, one GPIO, and one serial - all available on M12 connectors at the back of the panel PC. An M.2 slot and PCI Express Mini Card interface can control wireless communication functions like 2G, 3G, 4G and GPS. Two micro-SIM card slots with dual-SIM functionality are accessible at the back of the panel. Flexible Rail Network Connection Options The DC15 can provide Multifunction Vehicle Bus (MVB) master or slave support where necessary, by adding an MVB PCI Express Mini Card from Duagon. This makes the display scalable for different applications. Extremely Rugged, Perfectly Rail-Ready The DC15 comes with an extremely rugged housing with an IP65 compliant front. It supports a railway-compliant power supply of 24 or 110 VDC, its internal PSU complying with EN 50155 class S2. Also in compliance with the standard, the DC17 operates in a -40 °C to +70 °C environment (+85 °C for 10 minutes), achieved through fanless conduction-cooling technology. All electronic components are soldered to withstand shock and vibration, backed up by its solid M12 connectors, and are protected by conformal coating. The panel PC meets all important requirements for railway equipment for fast, competitive time-to-market even in mission-critical environments. At the same time its long availability and life-time of seven years reduces overall system costs. 10.4" display with LED backlight 1024 × 768 pixels resolution AMD Embedded G-Series Wireless communication 2G, 3G, 4G, WLAN, GNSS MVB interface (optional) All external interfaces on M12 connectors -40 °C to +70 °C (+85 °C), fanless Maintenance-free design Compliant to IP65 (front) and EN 50155 (railway) Windows and Linux support

DC17 Rugged 12.1" Panel PC with Touch Screen Railway Display Computer The DC17 is a rugged, fanless and maintenance-free human-machine interface (HMI) for the train driver cabin desk, for example as the operator display for CCTV control, diagnosis and maintenance, or fleet management. Robust Panel PC for Interactive Rail Applications The DC17 panel PC is a rugged, fanless and maintenance-free human-machine interface (HMI) for railway applications. It features a 12.1" display and a projected capacitive touch screen. Its small, ultra-flat mechanical design and configuration options save space in the driver cabin and allow the panel to be tailored for all types of applications in different train models. In addition, its full software compatibility with the 10.4" DC15 panel PC both increases flexibility and lowers costs, e.g., if an upgrade to a larger panel is necessary. High-Quality, High-Resolution Display The DC17 houses a robust impact-resistant XGA TFT LCD display with LED backlight, and features high illumination intensity. This ensures good readability, even when exposed to sunlight. It also features a buzzer for alarm purposes, as well as LEDs and a light sensor at the front. Due to its high resolution and optimized usability, it is a perfect choice for applications like CCTV. Powerful & Energy-Efficient Computing Built around a T40E AMD Dual Core processor with 1.0 GHz, the DC17 is equipped with 2 GB RAM and a 16 GB mSATA disk. Standard interfaces include two Fast Ethernet, one USB, one CAN, one audio, one GPIO, and one serial - all available on M12 connectors at the back of the panel PC. An M.2 slot and PCI Express Mini Card interface can control wireless communication functions like 2G, 3G, 4G and GPS. Two micro-SIM card slots with dual-SIM functionality are accessible at the back of the panel. Flexible Rail Network Connection Options The DC17 can provide Multifunction Vehicle Bus (MVB) master or slave support where necessary, by adding an MVB PCI Express Mini Card from duagon. This makes the display scalable for different applications. Extremely Rugged, Perfectly Rail-Ready The DC17 comes with an extremely rugged housing with an IP65 compliant front. It supports a railway-compliant power supply of 24 or 110 VDC, its internal PSU complying with EN 50155 class S2. Also in compliance with the standard, the DC17 operates in a -40 °C to +70 °C environment (+85 °C for 10 minutes), achieved through fanless conduction-cooling technology. All electronic components are soldered to withstand shock and vibration, backed up by its solid M12 connectors, and are protected by conformal coating. The panel PC meets all important requirements for railway equipment for fast, competitive time-to-market even in mission-critical environments. At the same time its long availability and life-time of seven years reduces overall system costs. 12.1" display with LED backlight 1024 × 768 pixels resolution AMD Embedded G-Series Wireless communication 2G, 3G, 4G, WLAN, GNSS MVB interface (optional) All external interfaces on M12 connectors -40 °C to +70 °C (+85 °C), fanless Maintenance-free design Compliant to IP65 (front) and EN 50155 (railway) Windows and Linux support

BL70W Rugged Box PC for Transportation with Intel Core i3 / i5 / i7 Railway & Automotive Embedded Computer for Wireless Connectivity The BL70W is a rugged, fanless EN 50155 railway and E-Mark automotive box computer, based on the Intel Core and Celeron families. It is used as railway communication and management computer, and - thanks to its built-in multitude of wireless interfaces - as passenger information and internet access system for public transportation. The BL70W is a fanless, maintenance-free box computer that has been designed for independent use or as display computer electronics for embedded wireless applications in transportation, e.g. in trains, commercial vehicles, mobile machines or airplanes. The BL70W is powered by an Intel Core i7-3517UE CPU, running at 1.7 GHz. Other processors of the 3rd generation Intel Core i7 family can be used which makes for high scalability in CPU (single/dual/quad core) performance. The BL70W is equipped with 4 GB of DDR3 SDRAM and offers microSD card and mSATA slots. Wireless Communication Four PCI Express Mini Card slots each with dual micro-SIM make it possible to flexibly implement the whole range of wireless interfaces such as mobile service standards up to 4G LTE or WLAN/WLAN IEEE 802.11, and derivates. A GNSS interface supporting positioning systems GPS and GLONASS complements the possibilities. Fanless Operation for Mobile Applications The system is designed for fanless operation at temperatures from -40 °C to +70 °C (+85 °C for up to 10 minutes), its special rugged aluminum housing with cooling fins serves as a heat sink for the internal electronics and in this way provides conduction cooling. Railway-Compliant PSU with Ignition Function The BL70W comes with its own integrated 30W 24 VDC nom. class S2 wide-range power supply and is in compliance with EN 50155 and ISO 7637-2 (E-mark for automotive). The power can be switched on and off using an ignition signal on the power connector, and a run-down time after switching off the ignition signal can be adjusted by software. Flexible System Design The various CPU options with the available selection of external interfaces (realized via separate graphics and I/O interface boards within the system) makes for an extremely flexible system design that can quickly be tailored to a vast number of applications. The BL70W supports up to two DisplayPort interfaces with full HD resolution. In addition, a multitude of other I/O is available at the front panel, including two Gigabit Ethernet, two USB 2.0, variable slots for legacy serial I/O (e.g. RS232) or CAN bus, general purpose inputs and relay outputs. Intel Core i7, 3rd generation Up to 16 GB DDR3 DRAM soldered, ECC 4 PCI Express Mini Card slots each with dual micro-SIM for GSM (2G), UMTS (3G), LTE (4G), WLAN, 9 antenna cut-outs GPS/GLONASS interface 2 Gigabit Ethernet, 2 USB 2.0, 2 DisplayPorts 1 RS232, 1 RS422/485 3 flexible slots for IBIS, RS232, RS422/485 or CAN 24 VDC and 36 VDC nom. class S2 power supply, incl. ignition -40 °C to +70 °C (+85 °C), fanless Compliant to EN 50155 (railways) Compliant to ISO 7637-2 (E-mark for automotive)

BC50R Rugged IP65 Box PC for Transportation with AMD G-Series Railway & Automotive Embedded Computer for Communication & Control The BC50R is an ultra-rugged, fanless EN 50155 railway and E-Mark automotive box computer for applications like data acquisition and data logging, vehicle-to-vehicle and vehicle-to-land-communication, based on an AMD dual-core T48N. Rugged and Maintenance-Free The BC50R is a maintenance-free box computer that has been designed, e.g., for data acquisition applications in rugged environments in vehicles, e.g. in trains, commercial vehicles, mobile machines or ships. All interfaces are implemented on rugged M12 connectors (USB, digital input and output, Gigabit Ethernet, CAN and legacy serial I/O). The housing is compliant to the IP65 protection class. Ready for Wireless Functions On the inside, the system offers two PCI Express Mini card slots with two SIM card slots for WLAN or 3G/4G functionality. The necessary antenna connectors can be made available at the front panel. A GNSS interface is already provided at an antenna at the front. Solid Performance, Solid Housing The BC50R is powered by an AMD Embedded G-Series APU (Accelerated Processing Unit), the T48N, running at 1.4 GHz. The use of the Embedded G-Series makes for high scalability in CPU (single/dual core) performance. It is equipped with 2 GB of DDR3 SDRAM and offers SD card and mSATA slots. The system is designed for fanless operation at temperatures from -40 to +70°C (+85°C for up to 10 minutes), its special aluminum housing with cooling fins serves as a heat sink for the internal electronics and in this way provides conduction cooling. Designed for In-Vehicle Operation The BC50R supports a 24 VDC and 36 VDC nom. class S2 power supply in compliance with EN 50155 or power supplies which comply with ISO 7637-2 (E-mark for automotive) (nominal input voltage 24 V) or with EN 60945 (ship). The power can be switched on and off using an ignition signal on the power connector, and a shutdown-delay time after switching off the ignition signal can be adjusted by software. Flexible and Scalable The combination of the various CPU/GPU options with the available selection of external interfaces (realized via separate graphics and I/O interface boards within the system) makes for an extremely flexible system design that can quickly be tailored to a vast number of applications. AMD Embedded G-Series APU IP65-protected housing Ethernet, USB 2.0, CAN, Serial I/O at front WLAN, GSM (2G), UMTS (3G), LTE (4G) via 2 PCI Express Mini Card slots GPS or GLONASS 24 VDC and 36 VDC nom. class S2 power supply, incl. ignition -40 °C to +70 °C (+85 °C), fanless Compliant to EN 50155 (railways) Compliant to ISO 7637-2 (E-mark for automotive) Compliant to EN 60945 (ship)

MP70S ARINC 600 IFEC Network Server DO-160G Qualified, SWaP-C Optimized Airborne Computer The MP70S is application-ready for high speed network applications inside an aircraft, such as in-flight entertainment, wireless content server, web servers or flight maintenance servers. It is based on the modular CompactPCI Serial standard. Multipurpose Airborne Network Server MP70S is an application ready, DO-160G pre-qualified, SWaP-C optimized, general purpose device for high speed network applications inside an aircraft, such as in-flight entertainment, wireless content server, web servers or flight maintenance servers. Powerful CPU, Carrier Grade Ethernet and High Capacity Storage The MP70S is powered by the latest generation Intel Core i7 CPU, features a carrier grade 16-port Ethernet switch and provides storage capacity for several terabytes of SSD which makes it the ideal solution for the high performance computing and networking requirements in aircraft. CompactPCI Serial Based and ARINC 600 Compliant The MP70S is ARINC 600 compliant, housed in a rugged convection cooled 4 MCU sized case which is designed for both line-fit and retrofit installations in avionics bays. Based on the open standard CompactPCI Serial, the MP70S is designed for long-term availability, scalability, flexibility and future guaranteed. It also guarantees the highest reliability due to directly soldered essential components such as the CPU and RAM and cable-less design. ARINC Interfaces and Configurable Wireless Options To connect to legacy aircraft equipment, the MP70S provides an interface for ARINC 429 and ARINC 717, as well as ARINC 763-3 discrete I/O. With two configurable wireless options, it can be configured to simultaneously act as a customer accessible wireless access point while also providing a connection to cellular 3G/4G networks to perform data loading. Multipurpose Display A display on the front panel allows the system designer to brand the system to his needs and/or show system status and operating instructions. Easy Access for Maintenance and Installation The MP70S service interfaces are directly accessible by opening the front flap for easy maintenance, installation and data loading. Two USB 3.0 interfaces allow extremely fast updates of the internal disks. The MP70S supports Linux (Windows on request), and is delivered with the operating system, Ethernet switch firmware and device drivers pre-installed. ARINC 600, 4 MCU housing with status display Intel Core i7, quad-core 64-bit processor 16-port managed Gigabit Ethernet switch CompactPCI Serial technology 2 rugged hot-plug HDD/SSD shuttles with locking support 2 antenna interfaces for wireless and/or 3G/4G cellular interfaces 2 USB 3.0 interfaces for fast data loading Multipurpose OLED graphic display Display port, USB 3.0, GB Ethernet and 2 SIM card slots accessible via the front flap Pre-qualified according to DO-160G

BL70S Rugged Box PC for Transportation with Intel Core i3 / i5 / i7 Railway & Automotive Embedded Computer for Storage Control The BL70S is a rugged, fanless EN 50155 railway and E-Mark automotive box computer, based on the Intel Core and Celeron families. It is used as train maintenance, surveillance and diagnosis computer, and - thanks to its built-in storage capacities - as railway video recorder and content server. The BL70S is a fanless, maintenance-free box computer for embedded storage applications such as content servers or video recorders. It offers two external SATA shuttles with hot-plug support. The BL70S is powered by an Intel Core i7-3517UE CPU, running at 1.7 GHz. Other processors of the 3rd generation Intel Core i7 family can be used which makes for high scalability in CPU performance. The BL70S is equipped with 4 GB of DDR3 SDRAM and offers microSD card and mSATA slots. Extensive Ethernet Functionality On the front of the rugged BL70S five Gigabit Ethernet interfaces are accessible. Four of these ports share one Gigabit Ethernet port from the chipset via a switch, while one port is used exclusively as Gigabit Ethernet uplink. The four ports routed over the switch support Power-over-Ethernet. Wireless Communication One PCI Express Mini Card slot with two SIM card slots offers the possibility to implement the wide range of functionality available on this form factor. This includes for example GSM (2G), UMTS (3G), LTE (4G) and derivates, WLAN / Wi-Fi IEEE 802.11 and derivates as well as positioning systems GPS or GLONASS. Fanless Operation for Mobile Applications The system is designed for fanless operation at temperatures from -40 °C to +70 °C (+85 °C for up to 10 minutes), its special aluminum housing with cooling fins serves as a heat sink for the internal electronics and in this way provides conduction cooling. Railway-Compliant PSU with Ignition Function The BL70S comes with its own integrated class S2 wide-range power supply with 24 V DC and 36 V DC nominal input voltage and a power consumption of 30 W and is in compliance with EN 50155 and ISO 7637-2 (E-mark for automotive). The power can be switched on and off using an ignition signal on the power connector, and a run-down time after switching off the ignition signal can be adjusted by software. Flexible System Design The various CPU options with the available selection of external interfaces makes for an extremely flexible system design that can quickly be tailored to a vast number of applications. The BL70S supports one DisplayPort interface with a resolution of 2560x1600. In addition, a multitude of other I/O is available at the front panel, including two USB 2.0 and variable slots for legacy serial I/O (e.g. RS232) or CAN bus. Intel Core i7, 3rd generation Up to 16 GB DDR3 DRAM soldered, ECC RAID 0/1, hot-pluggable on 2 HDD/SSD shuttles 4-port Gb Ethernet switch with PoE 1 Gb Ethernet uplink 1 PCI Express Mini Card slot with 2 micro-SIM slots for WLAN, GSM (2G), UMTS (3G), LTE (4G), GPS or GLONASS functionality 2 slots for IBIS, RS232, RS485, RS422 24 V DC and 36 V DC nom. class S2 PSU, with ignition -40 °C to +70 °C (+85 °C), fanless Compliant to EN 50155 (railways) Compliant to ISO 7637-2 (E-mark for automotive)