SA18 USB 1.1 Interface Adapter SA-Adapter The SA18 provides the transceiver part of a USB 1.1 interface, using a standard type A connector and connected by a ribbon cable. The SA18 provides the transceiver part of a USB 1.1 interface, using a standard type A connector and connected by a ribbon cable. SA-Adapters are small universal boards providing the physics for legacy serial I/O, fieldbus interfaces and other small I/Ofunctions. One serial line is provided per adapter, which can be plugged directly to the CPU board as a mezzanine. Alternatively, the adapter can be connected to the front panel via ribbon cable. The SA concept allows to add additional I/O interfaces to many of duagon's CPU boards, enhancing flexibility with regard to the line transceivers and isolation requirements. Whether a specific SA-Adapter (or a mix of different SA-Adapters) fits on a specific CPU board is determined by a combination of mechanical, performance, FPGA and operating system criteria and needs to be verified for every board configuration requested. 1 USB 1.1 channel Standard USB connector (Type A)

F22P Embedded Single Board Computer with Intel Core i3 / i5 / i7 3U CompactPCI PlusIO The F22P is an x86 PC based embedded computer for industrial automation and railway transportation, featuring the 3rd generation Ivy Bridge Intel Core family up to the i7-3615QE processor. The SBC is compliant with the PICMG 2.30 standard and as such a perfect migration path from CompactPCI to CompactPCI Serial. The F22P versatile 4HP/3U single-board computer is a continuation of duagon's proven range of Intel CPU boards. It is equipped with the high-performance third generation Intel Core i7 processor running at up to 3.3 GHz maximum turbo frequency with full 64-bit support. The CPU card delivers an excellent graphics performance and is designed especially for embedded systems which require high computing performance with low power consumption. The F22P offers a 32-bit/33-MHz CompactPCI bus interface and can also be used without a bus system. 4 USB 2.0 ports, 4 PCI Express x1 links, 2 SATA 3 Gb/s and 2 SATA 6 Gb/s interfaces as well as one Gigabit Ethernet are led to the J2 rear I/O connector which is compatible with the PICMG 2.30 CompactPCI PlusIO specification. The F22P is equipped with a state-of-the-art fast DDR3 DRAM which is soldered to the F22P to guarantee optimum shock and vibration resistance. An mSATA disk and a microSD card device which are connected via a USB interface and a SATA channel offer nearly unlimited space for user applications. The standard I/O available at the front panel of F22P includes graphics on a VGA connector, two PCIe-driven Gigabit Ethernet as well as two USB2.0 ports. The F22P can be extended by different side cards. Additional functions include a digital video interface for flat panel connection via DVI (multimedia), a variety of different UARTs or another four USBs, SATA for hard disk connection and HD audio. Thermal supervision of the processor and a watchdog for the operating system complete the functionality of the F22P. A TPM (Trusted Platform Module) chip is also assembled. The F22P operates in Windows and Linux environments as well as under real-time operating systems that support Intel's multi-core architecture. The InsydeH2O EFI BIOS was specially designed for embedded system applications. Equipped with Intel components exclusively from the Intel Embedded Line, the F22P has a guaranteed minimum availability of 7 years. The F22P is suited for a wide range of industrial applications, e.g. for monitoring, vision and control systems as well as test and measurement. Main target markets comprise industrial automation, multimedia, traffic and transportation, aerospace, shipbuilding, medical engineering and robotics. The F22P comes with a tailored passive heat sink within 4 HP height. The robust design of the F22P makes the board especially suited for use in rugged environments with regard to shock and vibration according to applicable DIN, EN or IEC industry standards. The F22P is also ready for coating so that it can be used in humid and dusty environments. Intel Core i7, 3rd generation Quad-core 64-bit processor For CompactPCI 2.0 systems or CompactPCI PlusIO 2.30 hybrid systems (2.0 and CPCI-S.0) Up to 16 GB DDR3 DRAM soldered, ECC microSD card and mSATA slots Front I/O: VGA, 2 Gbit Ethernet, 2 USB Rear I/O: 4 PCIe, 4 USB, 4 SATA, 1 Gbit Ethernet Other I/O (onboard, side card): SATA, SDVO, HDMI/Display Port, HD audio, USB, UART etc. 2.3 to 3.3 GHz Turbo Boost, Hyper-Threading, Active Management Technology Open CL 1.1 support

F23P Embedded Single Board Computer with Intel Core i3 / i5 / i7 3U CompactPCI PlusIO The F23P is an x86 PC based embedded computer for industrial automation and railway transportation, featuring the 4th generation Haswell Intel Core family up to the i7-4700EQ processor. The SBC is compliant with the PICMG 2.30 standard and as such a perfect migration path from CompactPCI to CompactPCI Serial. High Computing and Graphics Performance The F23P versatile 3U 4HP single-board computer is a member of the scalable family of Intel CPU boards which ensures future-safety and long-term availability of a system. The F23P can be equipped with the whole range of Intel's fourth generation Core i7, Core i5, Core i3 and Celeron processors offering up to 3.4 GHz maximum turbo frequency and full 64-bit support, Turbo Boost, Hyper-Threading, Active Management Technology and Virtualization Technology. An excellent graphics performance, thermal supervision of the processor and a watchdog for the operating system top off the functionality of the F23P. A Trusted Platform Module is assembled for platform integrity. Perfect for Embedded and Harsh Environments The F23P operates in Windows and Linux environments as well as under real-time operating systems that support Intel's multi-core architecture. The InsydeH2O EFI BIOS was specially designed for embedded system applications. It comes with a tailored passive heat sink. The robust design of the F23P - all components including the DDR3 DRAM are soldered - makes the board especially suited for use in rugged environments with regard to shock and vibration according to applicable DIN, EN or IEC industry standards. The F23P is also ready for coating for use in humid and dusty environments. Using a special frame, the F23P can quickly be adapted to conduction-cooled systems. CompactPCI PlusIO (PICMG 2.30) The F23P supports the CompactPCI PlusIO (PICMG 2.30) specification, meaning it can be used in a hybrid system for control of both CompactPCI and CompactPCI Serial peripheral boards. Compliant to the standard, 4 USB 2.0, 4 PCI Express x1, 4 SATA 6 Gb/s interfaces as well as one Gigabit Ethernet are accessible on the J2 rear I/O connector. Versatile Front I/O The standard I/O available at the front panel of F23P includes VGA, two Gigabit Ethernet and two USB 2.0 ports. The F23P can be extended by different side cards. Additional functions include a variety of different UARTs or another four USBs, SATA for hard disk connection and HD audio. Intel Core i7, 4th generation Quad-core 64-bit processor For CompactPCI 2.0 systems or CompactPCI PlusIO 2.30 hybrid systems (2.0 and CPCI-S.0) Up to 32 GB DDR3 DRAM soldered, ECC microSD card and mSATA slots Front I/O: VGA, 2 Gbit Ethernet, 2 USB Rear I/O: 4 PCIe, 4 USB, 4 SATA, 1 Gbit Ethernet Other I/O (onboard, side card): SATA, HDMI/Display Port, HD audio, USB, UART etc. 2.4 to 3.4 GHz Turbo Boost, Hyper-Threading, Active Management Technology Open CL support

PU4 Power Supply Unit, 72 to 110 VDC, 35 W 3U 8 HP PSU The PU4 3U 8HP power supply unit is a plug-in device for 19" systems (e.g. VMEbus, CompactPCI) and is especially designed for railway computer systems, being fully compliant with EN 50155. The PU4 3U 8HP power supply unit is a plug-in device for 19" systems (e.g. VMEbus, CompactPCI) and is especially designed for railway computer systems, being fully compliant with EN 50155. The PU4 has a nominal input voltage of 72-110 VDC with a wide input range of 50.4..137.5 V and a max. input voltage range of 43.2..154 V (according to EN 50155). The otherwise identical PSU models PU2 and PU3 are available for the nominal input voltages of 24 VDC and 36-48 VDC respectively. It is is controlled by a microprocessor which supervises the voltage and the temperature, as well as three external inputs and three outputs. Thanks to the onboard intelligence the PSU can also act as an SMBus slave and communicate with the CPU board via the backplane. This allows the PSU to power on the system at a programmed date or it allows the CPU to make status polls with regard to error messages, time-out, on/off, for example. The PSU provides a DC/DC converter to generate the isolated 5 V from the input voltage. A buck regulator generates 3.3 V from the 5 V isolated side. The maximum output power at full load is 35 W. The subassembly is conformally coated, and components are secured against vibration. The PSU operates in -40 to +85°C environmental temperature. The thermal stress is extremely low due to integrated heat sinks and diversion of dissipated heat over the mounting surface. 19" rack mountable 3U, 8 HP Input 72-110 VDC nom. (50.4 to 137.5 V) Max. input voltage range 43.2 to 154 V (according to EN 50155) Output 3.3 V and 5 V Power 35 W H15 DIN 41612 plug connector (front and rear) SMBus External I/Os for key function -40 °C to +85 °C Conformal coating Complies with EN 50155 (railways)

PU3 Power Supply Unit, 36 to 48 VDC, 35 W 3U 8 HP PSU The PU3 3U 8HP power supply unit is a plug-in device for 19" systems (e.g. VMEbus, CompactPCI) and is especially designed for railway computer systems, being fully compliant with EN 50155. The PU3 3U 8HP power supply unit is a plug-in device for 19" systems (e.g. VMEbus, CompactPCI) and is especially designed for railway computer systems, being fully compliant with EN 50155. The PU3 has a nominal input voltage of 36-48 VDC with a wide input range of 25.2..60 V and a max. input voltage range of 21.6..67.2 V (according to EN 50155). The otherwise identical PSU models PU2 and PU4 are available for the nominal input voltages of 24 VDC and 72-110 VDC respectively. It is is controlled by a microprocessor which supervises the voltage and the temperature, as well as three external inputs and three outputs. Thanks to the on-board intelligence the PSU can also act as an SMBus slave and communicate with the CPU board via the backplane. This allowsthe PSU to power on the system at a programmed date or it allows the CPU to make status polls with regard to error messages, time-out, on/off, for example. The PSU provides a DC/DC converter to generate the isolated 5 V from the input voltage. A buck regulator generates 3.3 V from the 5 V isolated side. The maximum output power at full load is 35 W. The subassembly is conformally coated, and components are secured against vibration. The PSU operates in -40 to +85°C environmental temperature. The thermal stress is extremely low due to integrated heat sinks and diversion of dissipated heat over the mounting surface. 19" rack mountable 3U, 8 HP Input 36 to 48 VDC nom. (25.2..60 V) Max. input voltage range 21.6 to 67.2 V (according to EN 50155) Output 3.3 V and 5 V Power 35 W H15 DIN 41612 plug connector (front and rear) SMBus External I/Os for key function -40 °C to +85 °C Conformal coating Complies with EN 50155 (railways)

PU2 Power Supply Unit, 24 VDC, 35 W 3U 8 HP PSU The PU2 3U 8HP power supply unit is a plug-in device for 19" systems (e.g. VMEbus, CompactPCI) and is especially designed for computer systems in public transport vehicles, being fully compliant with EN 50155. The PU2 3U 8HP power supply unit is a plug-in device for 19" systems (e.g. VMEbus, CompactPCI) and is especially designed for computer systems in public transport vehicles, being fully compliant with EN 50155. The PU2 has a nominal input voltage of 24 VDC with a wide input range of 16.8..30 V and a max. input voltage range of 14.4..33.6 V (according to EN 50155). The otherwise identical PSU models PU3 and PU4 are available for the nominal input voltages of 36-48 VDC and 72-110 VDC respectively. It is controlled by a microprocessor which supervises the voltage and the temperature, as well as three external inputs and three outputs. Thanks to the onboard intelligence the PSU can also act as an SMBus slave and communicate with the CPU board via the backplane. This allows the PSU to power on the system at a programmed date or it allows the CPU to make status polls with regard to error messages, time-out, on/off, for example. The PSU provides a DC/DC converter to generate the isolated 5 V from the input voltage. A buck regulator generates 3.3 V from the 5 Volts isolated side. The maximum output power at full load is 35 W. The subassembly is conformally coated, and components are secured against vibration. The PSU operates in -40 to +85°C environmental temperature. The thermal stress is extremely low due to integrated heat sinks and diversion of dissipated heat over the mounting surface. 19" rack mountable 3U, 8 HP Input 24 VDC nom. (16.8 to 30 V) Max. input voltage range 14.4 to 33.6 V (according to EN 50155) Output 3.3 V and 5 V Power 35 W H15 DIN 41612 plug connector (front and rear) SMBus External I/Os for key function -40 °C to +85 °C Conformal coating Complies with EN 50155 (railways)

PU1 Power Supply Unit, 110 VDC, 75 W 3U 12 HP PSU The 3U 12HP power supply unit PU1 is a plug-in device for 19" systems (e.g. VMEbus, CompactPCI) and is especially designed for railway computer systems, being fully compliant with EN 50155. The 3U 12HP power supply unit PU1 is a plug-in device for 19" systems (e.g. VMEbus, CompactPCI) and is especially designed for railway computer systems, being fully compliant with EN 50155. The 1.5 kV (effective) optically isolated PSU comes with a nominal input voltage of 110 VDC with a wide input range of 77..137.5 V (max. input voltage range 66..154 V according to EN50155) and a single output of 5 V at 75 W. It works up to +85°C without derating, delivering a thermal warning at over-temperature andswitching off at +95°C. The PSU supports an error signal (5 ms hold-up time), reverse-connect protection, permanent short-circuit protection, voltage control, synchronization, voltage in fail (ViF) and voltage out fail (VoF) as well as remote on/off. The subassembly is immersion-painted und partially cast, and components are secured against vibration. The thermal stress is extremely low due to integrated heat sinks and diversion of dissipated heat over the mounting surface. 19" rack mountable (VMEbus, CompactPCI) 3U, 12 HP Input 110 VDC nom. (77..137.5 V) Max. input voltage range 66..154 V (according to EN 50155) Output 5.1 V Power 75 W H15 DIN 41612 plug connector (front and rear) -40 °C to +85 °C without derating Conformal coating Complies with EN 50155 (railways)

PU6 Power Supply Unit, 24 VDC, 100 W 3U 12 HP PSU The PU6 is a plug-in power supply unit for 19" systems (e.g. VMEbus, CompactPCI) and is especially designed for computer systems in public transport vehicles, being fully compliant with EN 50155. The PU6 is a plug-in power supply unit for 19" systems (e.g. VMEbus, CompactPCI) and is especially designed for computer systems in public transport vehicles, being fully compliant with EN 50155. The PU6 has a nominal input voltage of 24 VDC with a wide input range of 16.8 V to 30 V and a maximum input voltage range of 14.4 V to 33.6 V (according to EN 50155). The otherwise identical PSU models PU5 and PU8 are available for the nominal input voltages of 110 VDC and 36 VDC, respectively. It is controlled by a microprocessor which supervises the voltage and the temperature as well as one external input (for its key input function) and one output. Thanks to the onboard intelligence the PSU can also act as an SMBus slave and communicate with the CPU board via the backplane. This allows the PSU to power on the system at a programmed date and enables the CPU to make status polls with regard to, e.g., error messages, time-out or on/off. The PSU provides a DC/DC converter to generate the isolated 12 V from the input voltage. Two regulators generate 5 V and 3.3 V from the 12 V isolated side. The maximum power at full load is 100 W total, with 40 W on 3.3 V and 60 W on 5 V. The minimum power is 5 W. The microprocessor is supplied with power independently and can turn off the main DC/DC converter to switch the unit into standby mode (power consumption less than 2 W). The subassembly is conformally coated, and components are secured against vibration. The PSU operates in -40 °C to +85 °C environmental temperature. The thermal stress is extremely low due to integrated heat sinks and diversion of dissipated heat over the mounting surface. The exact configuration and features of PU8 vary depending on the ordered model. 3U, 12 HP, 19" rack mountable Input 24 VDC nom. (16.8 to 30 V) Max. input voltage range 14.4 to 33.6 V (according to EN 50155) Output 3.3 V, 5 V, 12 V H15 DIN 41612 plug connector (front and rear) SMBus External I/Os for key input function Standby mode (1 W max.) -40 °C to +85 °C Conformal coating EN 50155 compliant (holdup time according to Class S2) (railways)

MM2 ESMini COM with Intel Atom E600 Series Computer-On-Module The MM2 is an ultra-small and rugged Computer-On-Module (COM) of the ESMini family featuring an x86 Intel Atom E680T CPU. It is designed for industrial automation, medical computers, in-vehicle computers, and embedded computers in transportation. The MM2 supports conductive cooling technology and is 100% EMC proof. The MM2 is an ultra-small Computer-On-Module of the rugged ESMini family. Together with an application-specific carrier board it forms a semi-custom solution for industrial, harsh, mobile and mission-critical environments. The small form factor board iscontrolled by an Intel Atom processor from the E6xx series. This processor family offers high I/O flexibility as it uses the PCI Express standard for the processor-to-chipset interface. The MM2 has a total power consumption of max. 5 to 7 W, while havinga clock frequency of up to 1.6 GHz. The MM2 accommodates up to 2 GB of directly soldered main memory. Different mass storage media are supported on the carrier board. The MM2 offers a multitude of I/O: besides modern serial I/O like two PCI Express x1links, LVDS, SDVO, high-definition audio, SATA and USB, it also provides legacy I/O (1 CAN, 4 COM, 2 I2C). The MM2 is completed by a board management controller for temperature and power supervision. It comes with a UEFI BIOS. The MM2 is screened for operation in a -40°C to +85°C temperature range (Tcase at the cover and frame). As all ESMini modules it is embedded in a covered frame. This ensures EMC protection and allows efficient conductive cooling. Air cooling is also possible by applying a heat sink on top of the cover. Where operating temperatures are moderate, the module may even do without the frame and cover, with a suitable low-power processor and airflow. ESMini modules are firmly screwed to a carrier board and come with rugged industry-proven connectors supporting high frequency and differential signals. Only soldered components are used to withstand shock and vibration, and the design is optimized for conformal coating. The MM2 supports a 95x55mm form factor. For evaluation and development purposes a microATX carrier board is available. Intel Atom E600 series, up to 1.6 GHz Up to 2 GB DDR2 SDRAM 2 PCI Express 2 Gb Ethernet interfaces 6 USB 2.0 hosts and 1 USB 2.0 client 4 UARTs 1 CAN bus interface SDVO, LVDS Intel HD audio 2 SATA ports -40 °C to +85 °C Tcase Conduction cooling

EM9A ESM COM with PowerPC MPC8548 Computer-On-Module The EM9A Computer-On-Module is an MPC8548/MPC8543 PowerPC based embedded SBC for use in different industrial environments, with custom I/O in an onboard FPGA. The EM9A is a complete embedded SBC for use on any carrier board in different industrial environments. The final application consists of a stand-alone EM9A or an EM9A with an application-specific carrier card. The EM9A is controlled by an integrated PowerPC MPC8548 or MPC8543 processor (optionally with encryption unit) running at clock frequencies between 800 MHz and 1.5 GHz. The EM9A is equipped with soldered DDR2 SDRAM for data and with NAND Flash for program storage. It provides access for three Gigabit Ethernet channels and two COM ports via its I/O connector J3. Additional functionality such as graphics, touch, CAN bus, protocol converters etc. can be realized in an FPGA for the needs of the individual application. The corresponding connectors are available on a carrier board. Application software dynamically loads the functions of the FPGA. The EM9A comes with MENMON support. This firmware/BIOS can be used for bootstrapping operating systems (from disk, Flash or network), for hardware testing, or for debugging applications without running any operating system. The EM9A is a communication engine ideal for use in embedded applications, for instance as an embedded Linux server, but also for high-end automation and robot control under a real-time operating system. For a first evaluation of the functions of the EM9A we strongly recommend to use the EK9 ESM starter kit. The kit consists of the function-compatible EM9 module (with front I/O), an FPGA loaded with additional I/O functions, the carrier card with I/O connectors, an external PSU, cables, and an adapter for mounting a PCI-104 module. ESM modules consist of the hardware (CPU, chip set, memory, I/O) which is not fixed to any application-specific function, and an FPGA programmed in VHDLcode, which provides I/O that is also still independent of a specific application. ESM modules are based on PCI. They have two or three system connectors: J1 has a fixed signal assignment, while J2 is variable depending on the final application-specific configuration of the ESM and the carrier board. J2 also feeds the I/O signals of the functions programmed in the FPGA to the carrier card. Some ESM modules have an additional J3 connector that is used to replace the front I/O connectors to route the signals to the carrier board or to the backplane of a CPCI or VME system. MPC8548 (or MPC8543), up to 1.5 GHz FPGA 33,216 LEs 32-bit/33/66-MHz PCI Up to 2 GB onboard DDR2 SDRAM 1 GB NAND Flash 128 KB FRAM, 32 MB additional SDRAM 3 Gb Ethernet, 2 COM (J3) User defined I/O functions optional via FPGA MENMON BIOS for PowerPC cards -40 °C to +85 °C