DC2 Rugged 10.4" Touch Panel PC Industrial Display Computer The panel PC DC2 is a rugged, fanless and maintenance-free human-machine interface for interactive applications in transportation and industrial automation. The panel PC DC2 is a rugged, fanless and maintenance-free human-machine interface (HMI) for interactive applications in transportation and industrial automation. It is designed for panel mounting and equipped with a 10.4" 4:3 LCD TFT display with a capacitive touch panel. The DC2 is controlled by the Intel Atom XL Z520PT running at 1.33 GHz and comes with 1 GB of DDR2 SDRAM and a built-in 2-GB microSD card. The standard interfaces comprise 2 Fast Ethernet (via RJ45 connectors) and 2 USB ports as well as four binary inputs (via the 10-pin power supply connector). The two Ethernet interfaces have switch functionality to provide Ethernet connection to subsequent intelligent displays. A temperature sensor is provided to monitor and controlthe display. All I/O signals are concentrated at the bottom of the unit. The DC2 is equipped with an internal 10 V to 36 V (12 VDC nom. or 24 VDC nom.) wide-range power supply and able to operate in a -40°C to +70°C environment (+85°C for 10 minutes). It complies with the EN 50155, class Tx railway standard when used with an optional includable PSU suited for railway applications. All electronic components are soldered to withstand shock and vibration and prepared for conformal coating. The unit's control electronics are directly attached to the back of the display, hence bigger screen sizes or other aspect ratios can be realized easily. Further options include other types of the Intel Atom XL processor, M12 connectors for the Ethernet interfaces, a serial interface or GPS adapter that can be added via an SA-Adapter, HD audio via a D-Sub connector and an antenna connector. A PCI Express Mini card slot (with a SIM card slot) in combination with an external antenna can be used to incorporate wireless functions like GPS, GLONASS, Wi-Fi, WIMAX, GSM/GPRS, UMTS, HSDPA and LTE. 10.4" 4:3 TFT LCD with capacitive touch panel 1024 x 768 pixels resolution Intel Atom processor 2 Fast Ethernet, 2 USB Wide-range PSU, 12/24 VDC nom. -40°C to +85°C operating temperature Fanless and maintenance-free design Compliant to ISO 7637-2 (E-mark for automotive), IP65 (front), IP20 (rear)

M79 Profibus DP Slave Interface M-Module The mezzanine card M79 is a Profibus DP interface M-Module (slave) based on the Infineon C165 CPU. The mezzanine card M79 M-Module is a Profibus DP (Distributed Peripherals) slave interface based on the Infineon C165 CPU. It is thus an ideal interface solution for intelligent remote I/O applications via a very popular fieldbus standard. The C165 CPU handles communication with the host CPU via the on-board shared DRAM. The advantage of this Profibus implementation is that the complete Profibus protocol stack runs locally on the M-Module with very reduced interaction of the host CPU. The RS485 Profibus interface (9-pin D-Sub) allows selectable transmission rates from 9.6 kbit/s up to 12 Mbit/s. The optically isolated interface is supplied by an on-board DC/DC converter. The output is short-circuit protected. The M79 comes with 512 KB local Flash, 1 MB local SRAM and 16 KB dual-ported RAM. Profibus slave functionality comprises initialization and termination of slaves, additional status information on output and input data as well as security services such as DP applications checked by a user watchdog or a protocol stack monitored by the application. The Profibus firmware consists of the true Softing protocol stack. The corresponding driver software comes from duagon and complies with standard Softing tools. It supports configuration of the M79 for each application in a very convenient way. The driver is based on MDIS ( Modular Driver Interface System) which makes the M79 ready for use under Windows, Linux and RTOS environments. The M79 is based on the M-Module ANSI mezzanine standard. It can be used as anI/O extension in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC. Appropriate M-Module carrier cards in 3U, 6U and other formats are available from duagon or other manufacturers. Profibus DP slave (DIN19245) Isolated RS485 Local 16-bit CPU 12 Mbit/s data transfer rate Complete Softing Profibus software on board Compatible with Softing tools

M54 DC Motor Controller M-Module The mezzanine card M54 is a motor controller M-Module that is suited for all types of motors that have a ±10V DC control input. The mezzanine card M54 is a motor controller that is suited for all types of motors that have a ±10V DC control input and that can provide a position feedback information using an incremental encoder (e.g. servo motors). The motor controller componenton the M54 is able to move a motor to a specific position at a specific speed. The PID values for the controller can be defined by software and thus be adapted to the motor used. In addition there are eight binary inputs and two binary outputs, which are isolated from each other, from the analog output and from the system. The M54 is based on the M-Module ANSI mezzanine standard. It can be used as an I/O extension in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC. Appropriate M-Module carrier cards in 3U, 6U and other formats are available from duagon or other manufacturers. 1 LM628 supported channel For every motor type with ±10 V control input Position and velocity operation Quadrature incremental encoder interface PID values programmable RS422 or TTL, ±10 V, 1 relay output Additional binary I/O Optical isolation Not conforming to RoHS

G302 Managed 16-Port Rugged Industrial Ethernet Switch 3U CompactPCI Serial The G302 is a rugged managed 3U Gigabit Ethernet switch implemented as a CompactPCI Serial board with up to 16 Ethernet ports. Managed Industrial Ethernet Switch The G302 is a managed 3U Ethernet switch implemented as a CompactPCI Serial board. It occupies one system slot or one peripheral slot, using a 4 HP front panel with 3 Gigabit Ethernet ports on RJ45 or M12 connectors and one service interface via M12. The G302 either features three Ethernet ports on the front and up to 13 Ethernet ports on the rear or alternatively all 16 Ethernet ports on the rear, which is the ideal solution for conduction cooling. Reliable Communication System Component The G302 supports full-duplex and half-duplex operation with auto-negotiation, high-speed non-blocking store-and-forward switching, Quality of Service (QoS) support with four traffic classes IEEE 802.1p and three-level 802.1x security. The switch is fault tolerant and restores itself on its own: If a link is temporarily unavailable, frames can be sent via backup/redundant links (spanning tree protocol/link aggregation) and no data loss occurs. Its built-in test mechanisms make the G302 an even more reliable component in the communication system. Compliant to Railway Standards The railway Ethernet switch is specifically designed for rugged mobile communication systems and fully compliant with the EN 50155 railway standard, qualified for a -40°C to +85°C operation temperature and ready for coating. Managed 16-port rugged Ethernet switch Up to 16 Gigabit Ethernet ports on rear I/O Or 3 ports on front and up to 13 ports on rear Configuration via Telnet CLI, SNMP ver. 3 or external dongle Service interface via M12 LEDs for front port and board states -40°C to +85°C with qualified components EN 50155 class TX compliant (railways) PICMG CPCI-S.0 CompactPCI Serial system slot and peripheral card

G301 Unmanaged 4-Port Rugged Industrial Ethernet Switch with PoE 3U CompactPCI Serial The G301 is an unmanaged 3U Gigabit Ethernet switch implemented as a CompactPCI Serial board with 4 Gigabit Ethernet ports on RJ45 connectors. Unmanaged Industrial Ethernet Switch The G301 is an unmanaged 3U Ethernet switch implemented as a CompactPCI Serial board. It occupies one peripheral slot, using a 4 HP front panel sporting 4 Gigabit Ethernet ports on RJ45 connectors. Options include M12 front connectors and a P6 connector for the rear I/O Ethernet signals from the board's fifth Gigabit Ethernet port. Reliable Communication System Component The G301 supports full-duplex and half-duplex operation with auto-negotiation and high-speed non-blocking store-and-forward switching. The switch is fault tolerant and restores itself on its own. Its built-in test mechanisms make the G301 an even more reliable component in the communication system. In addition, the switch can act as Power over Ethernet (PoE) Power Sourcing Equipment (PSE), supplying other devices on all ports with up to 7W (class 1, 2) per port for power according to IEEE 802.3 Section 2 - Type 1, class 1 and 2 (formerly known as IEEE 802.3af). The maximum power available for one G301 is limited to 28 W, according to CPCI-S.0 specification. Compliant to Railway Standards The board is specifically designed for rugged mobile communication systems. It is thus for example fully compliant with the EN 50155 railway standard, screened for a -40°C to +85°C operation temperature and ready for coating. Unmanaged 4-port rugged Ethernet switch 4 Gigabit Ethernet (front) on RJ45 (M12 optional) Power over Ethernet (PoE) PSE (all ports) LEDs for link and activity status 1 Gigabit Ethernet on rear I/O (optional) -40°C to +85°C (screened) EN 50155 class TX (railways) PICMG CPCI-S.0 CompactPCI Serial peripheral card

G100 CompactPCI Serial to CompactPCI Interface Card 3U CompactPCI Serial The G100 is used in combination with the F100 to connect a CompactPCI Serial system to a CompactPCI system. The G100 is used in combination with the F100 to connect a CompactPCI Serial system to a CompactPCI system. The CompactPCI Serial backplane and the CompactPCI backplane can either be located in one housing or in two separate ones. The G100 is plugged into a peripheral slot of a CompactPCI Serial system and is connected to the F100 via a PCI Express cable at the front which can have a length of up to 7 m. The F100 functions as the system slot in the CompactPCI system. The G100 uses one PCI Express x1 link from the backplane and leads it to the front to an 18-pin PCI Express connector. The board is qualified for operation in the extended temperature range of -40°C to +85°C. For operation together with F100 system slot card for CompactPCI 1 PCI Express x1 link -40°C to +85°C with qualified components PICMG CPCI-S.0 CompactPCI Serial peripheral card

F605 Side Card XMC/PMC 3U CompactPCI The F605 is a 4HP XMC or alternatively PMC extension card for 3U Intel based CompactPCI single-board computers F15, F17, F18 and F19P. The F605 is a 4HP XMC or alternatively PMC extension card for 3U Intel based CompactPCI single-board computers F15, F17, F18 and F19P. The XMC slot supports either one PCI Express link with 4 lanes on one XMC connector or 1 link with one lane on each ofthe two XMC connectors . The PMC slot can be used for 32/64 bit and 33/66 MHz PMC cards and supports up to 133 MHz PCI-X. The board detects automatically whether an XMC or a PMC is plugged. The F605 is directly plugged to the right side of the respective single-board computer. A robust connector makes for high mechanical stability. It is delivered with an 8HP front panel, replacing the 4HP front panel of a 3U single-board computer and thus resulting in a solid one-piece front panel. 4 HP extension for 3U Intel SBCs F15, F17, F18, F19P 1 XMC slot (PCIe 1 x4 link or 2 x1 links) or 1 PMC slot (32/64 bits, 33/66/133MHz, PCI-X) PMC rear I/O support via J2 (only in 32-bit backplane) -40°C to +85°C with qualified components

F601 Side Card for Multimedia 3U CompactPCI The F601 is a multimedia extension card for 3U Intel based CompactPCI single-board computers. It can be used in combination with the F14 and compatible CPU boards. The F601 is a multimedia extension card for 3U Intel based CompactPCI single-board computers. It can be used in combination with the F14 and compatible CPU boards. A variety of graphics, audio and serial interfaces characterize the functionality of the F601. Depending on the combination of these functions, the F601 may take one slot (4HP) or two slots (8HP) alongside the CPU card. The two DVI interfaces supporting the digital PanelLink technology deliver a maximum of 1600 x 1200 pixels in true-color mode. Together with the analog CRT interface from the CPU board it is possible to connect two monitors. The audio interface supports the high definition standard. SA-Adapters provide different physical layers for the UART interface, so that the F601 can be configured flexibly with either RS232, RS422 or RS485, alternatively isolated or not isolated. In addition an onboard 2.5" SATA hard-disk slot is available. The F601 is directly plugged to the right side of the respective single-board computer. A robust connector makes for high mechanical stability. It is delivered with an 8HP or 12HP front panel, replacing the 4HP front panel of a 3U single-board computer and thus resulting in a solid one-piece front panel. 4/8 HP extension for 3U Intel SBCs F14, F15, F17, F18, F19P, F21P 2 DVI connections 1 HD audio 1 COM, alternatively with optical isolation 2.5" SATA hard-disk slot

F100 CompactPCI to CompactPCI Serial Interface Card 3U CompactPCI The F100 is used in combination with the G100 to connect a CompactPCI Serial system to a CompactPCI system. The F100 is used in combination with the G100 to connect a CompactPCI Serial system to a CompactPCI system. The CompactPCI Serial backplane and the CompactPCI backplane can either be located in one housing or in two separate ones. The F100 is plugged into the system slot of the CompactPCI system. It is equipped with a PCI-Express-to-PCI bridge which acts as a master for up to 7 PCI devices. It supports 32-bit and 33-MHz. The F100 is connected to the G100 via a PCI Express cable at the front panel which can have a length of up to 7 m. The G100 is located in a peripheral slot of the CompactPCI system. Optionally the F100 can also be used without the G100 if the PCI Express x1 link is led to the board via the backplane. For this, a special backplane isneeded, however. Another possibility is to directly control a CompactPCI system using an external PC (e.g. a notebook) for evaluating or programming the application. The board is qualified for operation in the extended temperature range of -40 up to +85°C. 4 HP 32-bit/33-MHz CompactPCI Replaces system slot card For operation together with G100 peripheral slot card for CompactPCI Serial 1 PCI Express x1 link

D202 PC-MIP Carrier Board 6U CompactPCI The D202 is a 6U PC-MIP carrier board for universal I/O on the CompactPCI bus. The D202 is a 6U PC-MIP carrier board for universal I/O on the CompactPCI bus. You can install up to six PC-MIPs on the D202, with four Type I/II and two Type I PC-MIPs. All PC-MIPs provide I/O via the J3/J4/J5 CompactPCI connectors of the D202, while the four Type II modules are also accessible at the front panel. Even equipped with six PC-MIPs, the D202 needs only one slot on the CompactPCI bus. PC-MIPs are an ideal solution for flexible and fast CPU-related applications, which take advantage out ofthe internal PCI bus of the PC-MIPs. 1 CompactPCI bus slot 6 PC-MIP slots