F19P Intel Core 2 Duo CPU Board 3U CompactPCI PlusIO The F19P versatile 4HP/3U single-board computer is compatible to the CompactPCI PlusIO standard and equipped with the Intel Core 2 Duo processor SP9300. The F19P versatile 4HP/3U single-board computer is a continuation of duagon's proven range of Intel CPU boards. It is equipped with the Intel Core 2 Duo processor SP9300 running at 2.26 GHz and offering multi-core processor architecture from Intel with full64-bit support. The CPU card delivers an excellent graphics performance and is designed especially for embedded systems which require high computing performance with low power consumption. The F19P offers a 32-bit/33-MHz CompactPCI bus interface and canalso be used without a bus system. It offers 4 USB 2.0 and 4 fast (3Gb/s) SATA interfaces as well as 4 PCI Express x1 links and one Gigabit Ethernet on the J2 rear I/O connector which is compatible with the PICMG 2.30 CompactPCI PlusIO specification. A total of seven PCI Express lanes for high-speed communication (such as Gigabit Ethernet) are supported on the F19P. 3 x1 PCIe links are used for the three onboard Ethernet interfaces. 4 x1 PCIe links are available via rear I/O or on a specific side card. The F19P is equipped with a fast DDR3 DRAM which is soldered to the F19P to guarantee optimum shock and vibration resistance. A robust CompactFlash and microSD card device which are connected via a USB interface offer nearly unlimited space for user applications. The standard I/O available at the front panel of F19P includes graphics on a VGA connector, two PCIe-driven Gigabit Ethernet as well as two USB 2.0 ports. The F19P can be extended by different side cards. Additional functions include two digital video interfaces for flat panel connection via DVI (multimedia), a variety of different UARTs or another four USBs, SATA for hard disk connection and HD audio. Thermal supervision of the processor and a watchdog for the operating system complete the functionality of the F19P. The F19P operates in Windows and Linux environments as well as under real-time operating systems that support Intel's multi-core architecture. The InsydeH2O EFI BIOS was specially designed for embedded system applications. Equipped with Intel components exclusively from the Intel Embedded Line, the F19P has a guaranteed minimum standard availability of 7 years. The F19P is suited for a wide range of industrial applications, e.g. for monitoring, vision and control systems as well as test and measurement. The F19P comes with a tailored passive heat sink within 4 HP height. The robust design of the F19P make the board especially suited for use in rugged environments with regard to shock and vibration according to applicable DIN, EN or IEC industry standards. The F19P is also ready for coating so that it can be used in humid and dusty environments. Intel Core 2 Duo SP9300, 2.26 GHz Dual-core 64-bit processor 32-bit 4HP system master (or stand-alone) For CompactPCI 2.0 systems or CompactPCI PlusIO 2.30 hybrid systems (2.0 and CPCI-S.0) Up to 4 GB DDR3 DRAM soldered CompactFlash and microSD card slots Front I/O: VGA, 2 Gb Ethernet, 2 USB Rear I/O: 4 PCIe, 4 USB, 4 SATA, 1 Gb Ethernet Other I/O (onboard, side card): SATA, SDVO, HD audio, USB, UART etc. Board controller -40°C to +85°C screened version

XM50 ESMexpress COM with PowerPC MPC8548 Computer-On-Module The XM50 is a rugged Computer-On-Module (COM) of the ESMexpress family featuring a PowerPC MPC8548 or MPC8543 CPU. It is designed for industrial automation, medical computers, in-vehicle computers, and embedded computers in transportation. The XM50 supports conductive cooling technology and is 100% EMC proof. The XM50 is a computer-on-module of the ESMexpress family controlled by an integrated PowerPC MPC8548 or MPC8543 CPU processor (optionally with encryption unit) with clock frequencies between 800 MHz and 1.5 GHz. Together with an application-specific carrier board it forms a semi-custom solution for industrial, harsh, mobile and mission-critical environments. The XM50 accommodates up to 2 GB of directly soldered ECC main memory and supports other memory like USB Flash on the carrier board. It also features industrial FRAM and SRAM. Interfaces from the MPC8548 are all routed from the XM50 for availability on any ESMexpress carrier board. Those interfaces include up to three Gigabit Ethernet channels, 8 PCI Express lanes for one link (x4, x2 or x1, or x8as an option), triple SATA, 6 USB host ports and one USB client realized using a UART-to-USB converter. Additional COM interfaces can be made available on the carrier board via USB to COM conversion. The XM50 comes with MENMON support. This firmware/BIOS can be used for bootstrapping operating systems (from disk, Flash or network), for hardware testing, or for debugging applications without running any operating system. The XM50 is screened for operation in a -50°C to +85°C conduction or convection cooled environment. As all ESMexpress modules it is embedded in a covered frame. This ensures EMC protection and allows efficient conductive cooling. Air cooling is also possible by applying a heat sink on top of the cover. Where operating temperatures are moderate, the module may even do without the frame and cover, with a suitable low-power processor and airflow. ESMexpress modules are firmly screwed to a carrier board and come with rugged industry-proven connectors supporting high frequency and differential signals. Only soldered components are used to withstand shock and vibration, and the design is optimized for conformal coating. All ESMexpress modules support a single 95x125mm form factor. For evaluation and development purposes an ATX carrier board is available. The ESMexpress module can be evaluated on a COM Express carrier board via an adapter from ESMexpress to COM Express. MPC8548 (or MPC8543), up to 1.5 GHz Up to 2 GB (ECC) DDR2 SDRAM Up to 128 KB FRAM, 2 MB SRAM 3 (or 2) Gb Ethernet ports 6 USB 2.0, 1 USB client 3 SATA ports 1 PCI Express x4 MENMON BIOS for PowerPC cards -50°C to +85°C Tcase screened Conduction cooling

MM50 ESMini COM with PowerPC MPC512x Computer-On-Module The MM50 is an ultra-small and rugged Computer-On-Module (COM) of the ESMini family featuring an PowerPC MPC5121e or MPC5123 CPU. It is designed for industrial automation, medical computers, in-vehicle computers, and embedded computers in transportation. The MM50 supports conductive cooling technology and is 100% EMC proof. The MM50 is an ultra-small Computer-On-Module of the rugged ESMini family. Together with an application-specific carrier board it forms a semi-custom solution for industrial, harsh, mobile and mission-critical environments. The MM50 is controlled by thePowerPC MPC5121e or MPC5123, an e300 core processor with a performance of up to 400 MHz and optimized for mobile applications. With its integrated I/O features and powerful graphics engine, the MPC5121e pairs advanced video features with low power and excellent price/performance. Due to its architecture, the CPU has a power consumption of less than 3 W. The MPC5123 also integrates graphics but has no 3D acceleration. The MM50 accommodates up to 512 MB of directly soldered main memory and supports memoryextensions via SDHC on the carrier board, e.g., using MMC, SD, or SDIO cards. The COM module also comes with a multitude of I/O: besides modern serial I/O like USB (SATA prepared), it also provides legacy I/O (up to 4 CAN, 2 COM, 1 Fast Ethernet, 3 I2C,GPIO lines). Its display interface and AC'97 audio gear the MM50 for multimedia applications, while its six programmable serial controllers give additional flexibility to implement more serial I/O. The MM50 is screened for operation in a -40°C to +85°C temperature range with suitable airflow. As all ESMini modules it can also be embedded in a covered frame. This ensures EMC protection and allows efficient conduction cooling, if needed, e.g., in harsh environments. ESMini modules are firmly screwed to acarrier board and come with rugged industry-proven connectors supporting high frequency and differential signals. Only soldered components are used to withstand shock and vibration, and the design is optimized for conformal coating. The MM50 supports a 95 x 55 mm form factor. For evaluation and development purposes a microATX carrier board is available. MPC5121e or MPC5123, up to 400 MHz Up to 512 MB DDR2 SDRAM Flash, FRAM 1 Fast Ethernet interface 6 USB 2.0 (1 client) 2 UARTs Up to 4 CAN bus interfaces 6 programmable serial controllers, or display interface AC'97 audio U-Boot Universal Boot Loader -40 °C to +85 °C

F50P Embedded Single Board Computer with QorIQ MPC8548 3U CompactPCI PlusIO The F50P is a low-power PowerPC based embedded computer for industrial automation and railway transportation, featuring a PowerQUICC P3 processor. The SBC is compliant with the PICMG 2.30 standard and as such a perfect migration path from CompactPCI to CompactPCI Serial. The F50P is a versatile, rugged PowerPC based single-board computer for embedded applications. It is controlled by an MPC8548, or optionally an MPC8543 PowerPC processor (alternatively with encryption unit) with clock frequencies between 800 MHz and 1.5 GHz. The SBC is equipped with ECC-controlled, soldered-on DDR2 RAM for data storage, with up to 16 GB of solid-state Flash disk for program storage as well as industrial FRAM and SRAM. The CPU card provides up to three Gigabit Ethernet channels, six USB ports, up to two SATA interfaces and up to 64 user-definable I/O lines controlled by an optional onboard FPGA. These interfaces can be combined in many variations and are available at the front or at the rear using the board's J2 connector. The J2 pin assignment and connector type are in compliance with the PICMG 2.30 CompactPCI PlusIO standard - the migration path towards CompactPCI Serial. Two USB and two RJ45 Ethernet connectors are already provided at the front panel, and space is left for an optionalVGA connector. The large FPGA on the F50P allows to add additional user-defined functions such as graphics, touch, serial interfaces, fieldbus controllers, binary I/O etc. for the needs of the individual application in an extremely flexible way. Before boot-up of the system, the FPGA is loaded from boot Flash. Updates of the FPGA contents can be made inside the boot Flash during operation. If the FPGA is assembled, the card needs an extra 4 HP in front panel space. Equipped with a PCI-bridge chip, the F50P offers a full CompactPCI interface (system slot functionality) for reliable system expansion. Apart from that, the F50P can also be used as a busless, stand-alone board, with power supply from the backplane. Being designed for operation in a conduction or convection cooled environment, the F50P provides flexibility also in its cooling concept. Its firmly plugged-on CPU module is embedded in a covered frame. This ensures EMC protection and allows efficient conductive cooling for the F50C model, which is also available by standard. For air cooling, the F50P version comes with a tailor-made heat sink on top of the cover, requiring an 8-HP front panel, for an extended temperature range of -40°C to +70°C. The soldered components on the F50P withstand shock and vibration, and the board design is optimized for conformal coating. The F50P comes with MENMON support. This firmware/BIOS can be used for bootstrapping operating systems (from disk, Flash or network), for hardware testing, or for debugging applications without running any operating system. 32-bit CompactPCI and PICMG 2.30 PlusIO 8 HP or 12 HP with front I/O MPC8548 (or MPC8543), up to 1.5 GHz Up to 2 GB (ECC) DDR2 SDRAM Up to 128 KB FRAM, 2 MB SRAM Up to 16 GB SSD Flash Standard front I/O: 2 Gb Ethernet, 2 USB Standard rear I/O: 4 USB, 2 SATA FPGA for user-defined I/O functions (option) MENMON BIOS for PowerPC cards -40°C to +70°C (8 HP) (screened)

M43 8 Relay Outputs M-Module The mezzanine card M43 is a relay output M-Module for free potential switching of eight signals. The M43 mezzanine card is a relay output M-Module for free potential switching of eight signals. It is designed for industrial process I/O applications. The relays implemented guarantee highest reliability and long life. The M43 is based on the M-Module ANSI mezzanine standard. It can be used as an I/O extension in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC. Appropriate M-Module carrier cards in 3U, 6U and other formats are available from duagon or other manufacturers. 8 relay outputs 1 A switching power per relay One throw-over contact per relay Output voltage range max. 48 V No separate supply voltage

G51 QorIQ Communications CPU Board 3U CompactPCI Serial The G51 SBC unites the benefits of CPCI Serial and the interface and calculation capabilities of the quad-core P3041 QorIQ CPU, with a total of 4 Gb Ethernet ports. The G51 single-board computer unites the benefits of CompactPCI Serial and the interface capabilities and calculation power of a QorIQ CPU. Being based on an NXP quad-core QorIQ P3041 processor, the 3U, 4 HP SBC provides a large number of high-speed serial interfaces both at the front and at the CPCI-S.0 rear connectors. Three Gigabit Ethernet channels at the front and another standard port at the rear provide solid connectivity. The three front ports can also be routed to the rear, so that a maximum of four Ethernet channels are available on the backplane. This routing option is a standard feature, and can be set in the U-Boot boot loader. In a similar way, the G51 single-board computer comes with two SATA 2.x channels, where one can either be used for an onboard mSATA 2.x disk, or as a second port at the rear - also switchable via U-Boot. SGPIO is available, too. The G51 comes with one USB 2.0 front port, one USB 2.0 configuration port and five standard rear USB 2.0 ports. The USB front interface can be led to the rear as a hardware option, for a total of six USB backplane channels. Three PCI Express links (two x2 and one x4) add another important column of CompactPCI Serial features to the G51's rear I/O. Its abundant connectivity, flexible configuration options and multi-core computing performance make the G51 a universal off-the-shelf platform for all kinds of communication and processing tasks. Data acquisition, data encryption, simulation and process control systems are only a few examples. Suitable CompactPCI Serial peripheral cards are available to add specialized functions in a modular system where necessary. Apart from its connectivity, the card comes with fast DDR3 RAM, a microSD card slot, a number of board management functions and Linux BSP support. All components are soldered for protection against shock and vibration and withstand an extended operating temperature of -40°C to +85°C. As an option, the board can be equipped with M12 Ethernet front connectors. The G51 is also ready for coating so that it can be used in humid and dusty environments. All this makes the G51 a perfect choice for railway, aerospace or marine applications, but also for fields like automation or power & energy, where computers face harsh environments. Single-board computer with up to 4 Gb Ethernet P3041 NXP QorIQ quad-core PowerPC processor 4 HP system master and peripheral slot PICMG CPCI-S.0 CompactPCI Serial Up to 8 GB DDR3 SDRAM soldered, ECC Standard front I/O: 3 Gb Ethernet, 2 USB 2.0 Standard rear I/O: 3 PCIe, 4 Gb Ethernet, 5 USB 2.0, 2 SATA (3 Gb) -40 to +85°C with qualified components Compliant to EN 50155 (railways)

PU5 Power Supply Unit, 110 VDC, 100 W 3U 12 HP PSU The PU5 is a plug-in power supply unit for 19" systems (e.g. VMEbus, CompactPCI) and is especially designed for computer systems in public transport vehicles, being fully compliant with EN 50155. The PU5 is a plug-in power supply unit for 19" systems (e.g. VMEbus, CompactPCI) and is especially designed for computer systems in public transport vehicles, being fully compliant with EN 50155. The PU5 has a nominal input voltage of 110 VDC with a wide input range of 77 V to 137.5 V and a maximum input voltage range of 66 V to 154 V (according to EN 50155). The otherwise identical PSU models PU6 and PU8 are available for the nominal input voltages of 24 VDC and 36 VDC, respectively. It is controlled by a microprocessor which supervises the voltage and the temperature as well as one external input (for its key input function) and one output. Thanks to the onboard intelligence the PSU can also act as an SMBus slave and communicate with the CPU board via the backplane. This allows the PSU to power on the system at a programmed date and enables the CPU to make status polls with regard to, e.g., error messages, time-out or on/off. The PSU provides a DC/DC converter to generate the isolated 12 V from the input voltage. Two regulators generate 5 V and 3.3 V from the 12 V isolated side. The maximum power at full load is 100 W total, with 40 W on 3.3 V and 60 W on 5 V. The minimum power is 5 W. The microprocessor is supplied with power independently and can turn off the main DC/DC converter to switch the unit into standby mode (power consumption less than 6 W). The subassembly is conformally coated, and components are secured against vibration. The PSU operates in -40 °C to +85 °C environmental temperature. The thermal stress is extremely low due to integrated heat sinks and diversion of dissipated heat over the mounting surface. The exact configuration and features of PU5 vary depending on the ordered model. 3U, 12 HP, 19" rack mountable Input 110 VDC nom. (77 to 137.5 V) Max. input voltage range 66 to 154 V (according to EN 50155) Output 3.3 V, 5 V, 12 V H15 DIN 41612 plug connector (front and rear) SMBus External I/Os for key input function Standby mode (1 W max.) -40 °C to +85 °C Conformal coating EN 50155 compliant (holdup time according to Class S2) (railways)

XM2 ESMexpress COM with Intel Core 2 Duo Computer-On-Module The XM2 is a Computer-On-Module of the ESMexpress family equipped with a Intel Core 2 Duo processor. The XM2 is a Computer-On-Module which together with an application-specific carrier board forms a semi-custom solution for industrial, harsh, mobile and mission-critical environments. The XM2 is controlled by a Intel Core 2 Duo CPU with a clock frequency of up to 2.26 GHz and a total power consumption of up to 40W. The XM2 can accommodate 4 GB of DDR3 DRAM memory and supports other memory like USB Flash on the carrier board. The GS45 graphics controller supports x16 PCI Express Graphics or up to two SDVO interfaces, or one LVDS port. In addition, four x1 or one x4 PCI Express links are supported by the XM2. Other modern serial interfaces are 2 Gigabit Ethernet channels, 8 USB ports, 3 SATA ports, and one HD audio port. These interfaces are all routedfrom the XM2 for availability on any ESMexpress carrier board. The XM2 is completed by a board management controller for temperature and power supervision. It comes with an InsydeH2O EFI BIOS configurable for the final application. The XM2 is screenedfor operation from 0°C to +85°C (Tcase). As all ESMexpress modules it is embedded in a covered frame. This ensures EMC protection and allows efficient conductive cooling. Air cooling is alsopossible by applying a heat sink on top of the cover. With a low power processor the module may even be operated in an extended temperature range. ESMexpress modules are firmly screwed to a carrier board and come with rugged industry-proven connectors supporting high frequency and differential signals. Only soldered components are used to withstand shock and vibration, and the design is optimized for conformal coating. All ESMexpress modules support a single 95x125mm form factor. For evaluation and development purposes an ATX carrier board is available. The ESMexpress module can be evaluated on a COM Express carrier board via an adapter from ESMexpress to COM Express. Intel Core 2 Duo up to 2.26 GHz Up to 4 GB DDR3 SDRAM 1 x 16 PCI Express Graphics link 4 x 1 PCI Express links 2 Gb Ethernet 3 SATA ports 8 USB 2.0 Up to 2 SDVO ports Intel HD audio 0°C to +85°C Tcase screened Conduction cooling

P598 Conduction-Cooled FPGA-based USM Main PMC PCI Mezzanine Card The P598 is a conduction-cooled USM main mezzanine PMC with onboard FPGA. USM Universal Submodules make PMC modules more flexible than ever. The conduction-cooled main PMC P598 gets its specific function through the IP cores implemented inside the onboard FPGA. This function can be changed at any time through implementation of different IP cores. The corresponding line drivers are realized on the USM which is simply plugged on the P598. The same USM may also be used on convection-cooled PMCs and XMCs or main M-Modules. A new design is then limited to the USM module and the FPGA content and therefore saves development time and costs. A Nios soft processor implemented in the Cyclone II FPGA by Altera provides local intelligence where needed. The growing range of Wishbone-based standard IP cores from duagon comprise different UARTs, Ethernet, fieldbus interfaces, digital I/O etc. For users that like to write and/or implement specific IP cores on their own a complete development kit is available. The kit is based on a function-identical convection-cooled PMC module with front I/O. The USM concept has been developed for harsh environment. Therefore, the P598 uses robust connectors to the USM, while all other components are soldered, and operates in a -40 to +85 °C temperature range with qualified components. The P598 is a conduction-cooled PMC mezzanine card suitable for any compliant host carrier board in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC. Appropriate carrier cards in 3U, 6U andother formats are available from duagon or other manufacturers. Main PMC for USM Universal Submodules Conduction-cooled (CCPMC) 1 USM slot 1 FPGA 33,216 LE (for user-defined I/O and Nios soft core) 32 MB DDR2 SDRAM 2 MB Flash -40 to +85°C with qualified components

P512 Reflective Memory PMC PCI Mezzanine Card The P512 is a Reflective Memory PMC mezzanine module for redundant computer structures in safety-critical applications. The P512 offers Reflective Memory functionality, for example for redundant computer structures in safety-critical applications. Reflective memory is a memory bus technology from Encore Computer that allows simultaneous reads and writes to multiple memories. It can be used to share memory among multiple CPUs. The advantage of reflective memory is the possibility to set up deterministic real-time communication networks across computer systems and operating systems. Each P512 module offers one LVDS channel. The modules can be interconnected in a fully connected mesh and support multi-mode up to two meters. Each computer in a system needs one PMC for each connection to another computer (2 computers: 1 PMC each, 3 computers: 2 PMCs each etc). The module is equipped with 32 MB DDR2 DRAM. The P512 is a PMC mezzanine card suitable for any PMC compliant host carrier board in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC in telecommunication, industrial, medical, transportation or aerospace applications. It supports 32 bits/33 MHz. Appropriate PMC carrier cards in 3U, 6U and other formats are available from duagon or other manufacturers. 32-bit/33-MHz PMC 1 LVDS channel Usable in a fully connected mesh Multi-mode up to 2 meters 32 MB DDR2 SDRAM -40 to +85°C with qualified components