D205 MVB interfaces development board The D205 is an evaluation board for two duagon MVB controllers (D013 and D015). It allows full access to MVB controller through serial interface, without any hardware development. It is intended for laboratory use only. MVB EMD or ESD operation D013/D015 serial interface Wide power supply range (5V to 15V) Flexible interfacing possibilities (LVTTL, RS-232 or RS-485) exposed duagon Command Line Interface of D013/D015– for example for software updates exposed JTAG interface of D013/D015

D413 Dev Kit D413 Development Kit The purpose of the D413 – MVB Software Development Kit – is to support the integration of any duagon MVB Interface into a customer controller platform. The application engineer can start implementation of the MVB application software before the final hardware platform is ready. The D413 offers the same API (Application Programming Interface) as any duagon MVB Interface. An application implemented using the D413 just needs to be linked with the MVB driver software ported to the customer hardware platform. Immediately start MVB application software development The D413 supports both configuration available for any duagon MVB Interface: MDFULL SERVER MVB communication is possible with ESD+ and EMD based networks

DXIO0808/DAXIO3410Kit DAXIO / DXIO Development kit

D023E Compact Dual Real-Time Ethernet Interface Cybersecurity-Enabled Communication Module for Real-Time Ethernet Protocols Dual RT Ethernet interface with cyber security features for secure communication in trains Handles Real-Time Ethernet Protocols Independently from Host The D023E is a multi-purpose dual Ethernet controller interface with embedded processing power. The space-saving component encapsulates all Ethernet relevant functions on a small 48 x 50 mm size footprint. The interface card handles all train-borne Ethernet communication protocols, while lowering the requirements to the host system, as there is no need for additional power for the Ethernet stack. Moreover, the main application does not need to share CPU power with Ethernet protocol stacks or cybersecurity features such as encryption. Rail-Specific Network Protocols The D023E natively supports the most commonly used real-time Ethernet train communication network protocols, including TRDP, EtherNet/IP CIP and more. The interface card provides maximum availability by supporting redundancy protocols including RSTP and dual-homing. It may be used as time-sensitive networking (TSN) endpoint and supports time synchronization according to IEEE 802.1AS, time-aware shaping and low latency communication. Currently only TRDP over TSN is supported; support for other protocols is planned. It provides a web front-end for easy remote management (diagnostics and configuration purposes). The device may also be configured by the host system or it can be ordered pre-configured to be compatible with the most important OEMs. Extended Cybersecurity duagon offers different cybersecurity packages to harden the D023E. The available packages include features such as secure communication for remote access, centralized user access management, secure event logging and secure firmware updates. Easy Integration into Host System The digital interfaces act on 3.3 V logic levels fitting most of the modern CPU platforms. The D023E is fully pin-compatible to the predecessor D013E. It is designed for harsh rolling stock environments, and is fully compliant with EN 50155. Compact dual real-time Ethernet interface Supports common train-borne Ethernet protocols Implements field bus communication independently from host system Support for interface redundancy: dual homing ring with RSTP of MRP Advanced cybersecurity features available Support for Time-Sensitive Networking (TSN) Space-saving form factor (48 x 50 x 27 mm) -40 °C to +85 °C operating temperature range Pin and function compatible to predecessor D013E Fully compliant with EN 50155 and IEC 61375

D013 MVB Interface Chip-sized Multipurpose MVB Communication Module for Railway Systems Fully Featured MVB Communication Chip The D013 is a chip-sized MVB controller component on a 48 x 50 x 13 mm footprint, designed for direct integration on a host system PCB. It provides a complete MVB communication solution and fully complies with IEC 61375 and EN 50155. All core elements of the MVB architecture are integrated in a single component, including process and message data, optional bus administrator functionality and EMD and ESD+ physical layer support. MVB Controller duagon's own MVB controller is implemented in an FPGA and supports all 4096 process data ports. The host interface is selectable by MODE pin configuration, offering an 8-bit parallel interface for maximum performance, or SPI and serial UART interfaces for simpler connections. The D013 is available in two configurations: process data only, or process and message data. In the process and message data configuration, a soft CPU runs the optional message data stack directly on the component, minimizing the CPU requirements on the host system. In the process data only configuration, the MVB interface is controlled directly by the host. The optional bus administrator manages the complete MVB network and can be configured using duagon's proprietary network tool. For Rolling Stock Environments Designed for harsh rolling stock environments, the D013 meets railway requirements for temperature, humidity, vibration, and EMC. It operates reliably from -40 °C to +85 °C, features conformal coating against humidity, and provides enhanced EMI and vibration robustness in accordance with EN 50155, EN 50121, and EN 61373. Space-saving form factor (48 × 50 x 13 mm) Support for MVB devices up to class 4, including bus administrator functionality, process and message data Host interface configurable as 8-bit parallel, SPI or serial (UART) Compliant with IEC 61375, EN 50121, EN 50155 and EN 61373 –40 °C to +85 °C operating temperature

D215E Dual CompactPCI to Ethernet Interface The D215E is a multi-purpose 10/100Mbit Ethernet interface for the CompactPCI bus (cPCI). The interface is available with different communication stacks. The D215E includes two galvanically isolated Ethernet interfaces to connect individually to two Ethernet networks. It is also possible to use the D215E as a 3-port Ethernet switch. Optionally, the D215E incorporates circuitry for LAN bypassing which allows to use the D215E in ring and line topologies. The D215E is engineered for harsh rolling stock environments and is fully compliant to EN 50155. The D215E is not recommended for new designs. TCP/IP, UDP IPTCom / TRDP CIP, PROFINET Webserver Flash File System cPCI 3U 19" Rack

D153E PC/104 Ethernet Interface Ethernet Controller for PC/104 Hosts The D153E is a multi-purpose dual 10/100 Mb/s Ethernet Controller Interface for PC/104 host systems. It features embedded processing power with hardware prioritization and very low jitter for reliable communication. The interface card encapsulates all Ethernet-relevant functions on a standardized PC/104 module, making it a powerful communication module that handles various Ethernet communications protocols. By offloading these tasks from the host system, the D153E lowers processing performance requirements, reducing the need for additional CPU power. Additionally, the D153E is fully compliant with IEEE 802.3 and supports features like Auto-Polarity, Auto-Negotiation, and Auto-MDI-X. Prepared for Redundancy An optional full-featured 3-port switch can be integrated to enable ring topologies directly on the D153E. The optional bypass relays keep the ring topology also in case of a malfunction of the D153E. The device further supports the Rapid Spanning Tree Protocol (RSTP) according to IEEE 802.1w. For additional redundancy protocol please contact duagon. Rail-Specific Network Protocols The D153E is prepared for the "Ethernet on traction vehicles" standard IEC 61375-3-4. It supports various rail-specific Ethernet protocols like TRDP, CIP, IPTCom, PROFINET, UDP or TCP/IP. The interface card is designed for harsh rolling stock environments and is fully compliant to EN 50155. Extended Cybersecurity duagon offers different cybersecurity packages to harden the D153E. The available packages include features such as secure communication for remote access, centralized user access management, secure event logging and secure firmware updates. Highly Integrated Hardware, Easy Software Integration The D153E integrates the magnetics with a galvanic isolation of 1.5 kVrms, the PHY, the complete protocol controller and a simple host interface. With duagon's driver kit the D153E, which features an easy-to-use UART emulation, can be integrated very quickly on almost any host system through a small register set, therefore the device does not need a wide address range compared to a solution based on dual-ported memory. Proprietary Ethernet stack for process data prioritization with decreased data latency Support for real-time Ethernet protocols e.g. EtherNet/IP - CIP, IPTCom, PROFINET, TRDP Optional full-featured 3-port switch and on-board bypass relays Support for redundancy protocols, e.g. RSTP Cybersecurity features available duagon web server for remote firmware updates -40 °C to +85 °C operating temperature

D017M PCI Express Mini Card MVB Interface Mini Card MVB Interface with Bus Administrator functionality MVB Interface with Flexible Configuration The D017M is an MVB interface card for PCI Express Mini systems. The module provides one line-redundant galvanically isolated interface with lines A and B. EMD or ESD+ can be chosen as physical layers. duagon's own MVB controller is implemented in an FPGA and supports all 4096 process data ports. An additional 32-bit soft processor handles the complete message data stack with an easy-to-use interface. The D017M fully complies with the TCN standard IEC 61375 up to MVB class 4. The optional bus administrator manages the complete MVB network and can be configured using the duagon D2000 network tool. To fulfill the requirements of the different applications, the physical layer of the MVB (line transceivers, galvanic isolation, power generation for MVB termination) is either included in the PCIe Mini Card or is incorporated on a dedicated PHY board. Two D-Sub connectors can also be delivered by selecting the corresponding ordering option. Host Driver & API Support The interface card is accompanied by a host driver packet, providing a unified application programming interface (API) to access the various protocols and functions. The host driver is based on a client-server model, where the host system acts as client and the D017M as server. The driver packet is available for different operating systems, such as Windows and Linux, and can easily be ported to any embedded OS. For Rolling Stock Environments The D017M is designed for harsh rolling stock environment and complies with the EN 50155 standard: it withstands -40 °C to +85 °C operating temperatures, is coated against humidity and provides enhanced EMI and vibration robustness. Space-saving through miniaturized form factor Support for MVB devices up to class 4, including bus administrator functionality, process and message data Complete MVB physical layer, including integrated terminator resistors and generators Full range of 4096 process data ports –40 °C to +85 °C operating temperature

D015M PC/30 MVB Interface Small Multipurpose MVB Interface with Bus Administrator functionality The D015M is a multi-purpose MVB interface on a 40 x 85 mm size footprint (PC/30). All features of the MVB architecture are available: Process Data, Message Data, Bus Administrator as an option and physical layer EMD or ESD+. The D015M is available in two configurations: as a passive MVB interface with a duagon MVB controller ("MDFULL") or an active MVB interface including the Message Data Real Time Protocol stack MD RTP ("SERVER"). This approach minimizes the CPU requirements of the host system, because the major part of the communication software runs on the duagon interface A handy starter-kit is available for evaluation and host-application-software development. The D015M complies with the TCN standard IEC 61375. It is designed for the harsh traction environment and conforms to the EN 50121, EN 50155 and EN 61373 standards. It operates reliably from -40 °C to +85 °C, features conformal coating against humidity, and provides enhanced EMI and vibration robustness. The D015M is not recommended for new designs. Can act as a full featured MVB Bus administrator ANSI C source files allows an easy porting to any host / operating system combination The module is compatible with EMD and ESD+ physical MVB layers The D015M conforms with the EN50121, EN50155, EN 61373 and IEC61375 standards, and is designed for the harsh traction environment Modules of this product series (D015) can easily be exchanged without adaptation of the customer's host PCB

D013E Dual Ethernet Interface Small Communication Module for Real-Time Ethernet Protocols Space-Saving Controller for Complex Ethernet Protocol Stacks The D013E is a multi-purpose dual Ethernet controller interface, available with one or two galvanically isolated 10/100 Mbit Ethernet interfaces (ETH0/ETH1). It features embedded processing power with hardware prioritization and very low jitter for reliable communication. The space-saving component encapsulates all Ethernet-relevant functions on a compact 48 x 50 mm footprint, acting as a communication chip that handles the Ethernet protocol stack independently. This lowers the requirements on the host system, as no additional CPU power is needed. Rail-Specific Network Protocols The D013E is fully compliant with IEEE 802.3 and supports 10BASE-T or 100BASE-TX, auto-crossover and autonegotiation. It supports the most commonly used real-time Ethernet train communication network protocols including TRDP, EtherNet/IP, CIP and more. The interface card provides maximum availability by supporting redundancy protocols including RSTP and dual-homing. An optional internal switch enables daisy chains and the corresponding ring protocols. Furthermore, a dedicated bypass output provides the drivers for external bypass relays, which are not part of the D013E. Web maintenance and cybersecurity features are available as options. Easy Integration into Host System With duagon's driver kit, the D013E can be integrated quickly on almost any host system through a small register set, each 8 bits long, without the wide address range required by dual-ported-memory-based solutions. The host interface, configurable by bootstrapping pins, can be operated as serial (RS/TX), 8-bit parallel, or SPI. The digital interfaces operate at 3.3 V logic levels, compatible with most modern CPU platforms. The D013E is designed for harsh rolling stock environments and is fully compliant with EN 50155. Space-saving form factor (48 x 50 x 10 mm) Proprietary Ethernet stack for process data prioritization with decreased data latency Support for most common real-time Ethernet protocols including EtherNet/IP-CIP IPTCom PROFINET and TRDP Support for redundancy protocols e.g. RSTP duagon web server for remote firmware updates -40 °C to +85 °C operating temperature range