G215 UART, CAN Bus & Digital I/O Interface Board 3U CompactPCI Serial The G215 is a 3U CompactPCI Serial peripheral card offering different interface configurations for RS-232, RS-422, RS-485 UARTs, CAN bus or binary I/O. The G215 is a universal interface board based on 3U CompactPCI Serial. The physical layer can be realized for each channel individually using SA-Adapters. SA-Adapters are small universal boards providing the line drivers for legacy serial I/O, fieldbus interfaces and other I/O functions. SA-Adapters typically use 9-pin D-Sub connectors at the front panel and can also be connected to the front panel via ribbon cable. The SA concept enables adding additional I/O interfaces to the G215, enhancing flexibility regarding line transceivers and isolation requirements. Two SA-Adapters can be mounted directly on the G215, up to six more adapters need more front-panel space and can be connected to the carrier via ribbon cable. The G215 comes in a standard configuration with five predefined functions on 8 HP: two CAN interfaces, two UARTs and one 8-channel digital I/O interface. Accordingly, duagon offers a large variety of SA-Adapters that can be ordered as needed, e.g. for the UARTs. The board's I/O functions are realized by means of an FPGA, making it a very flexible and inexpensive solution for dedicated serial I/O. The card fits all purposes from a customized I/O combination to a specialized 8-port CAN card or even an intelligent I/O board with a Nios soft core on 4, 8 or 12 HP. duagon also offers an option to access further I/O signals including high-speed interfaces via rear I/O on CompactPCI Serial connectors P3 and P4. The FPGA is loaded automatically from a 4 MB serial flash after powerup. To facilitate updating, this flash is user-accessible. Configurations of up to 64 MB of DDR2 SDRAM are available to complement the functions of the FPGA. This DRAM can be used as large buffer memory for more complex protocols, for instance. The G215 is designed for use in rugged environments. For example, all components are soldered-on and are specified for an operating temperature of -40 °C to +85 °C. 5 interfaces at 8 HP front: 2 UARTs, 2 CAN bus, 1 digital I/O port Other function combinations via FPGA IP cores For protocols/physical layers like RS232/RS422/RS485, HDLC, CAN bus, IBIS, GPS, digital I/O Physical layers via SA-Adapters -40 °C to +85 °C PICMG CPCI-S.0 CompactPCI Serial peripheral card
G211F Quad Fiber Optics Interface Board 3U CompactPCI Serial The G211F is a rugged 3U CompactPCI Serial peripheral board for implementing four optical fiber Ethernet interfaces supporting 1000BASE-SX. Quad Fiber Optics Ethernet Board The G211F is a rugged 3U CompactPCI Serial peripheral board. It offers the possibility to implement four optical fiber Ethernet interfaces. The board is equipped with a cage for connection of four SFP transceivers. The cage hosts the optical adapter. The cables are connected to the adapter module. duagon offers an optical transceiver with LC-Duplex connectors as an accessory. The G211F can be used in combination with a CompactPCI Serial or CompactPCI PlusIO CPU board in a CompactPCI Serial or hybrid system. 1000BASE-SX Channels All four interfaces are controlled by one Ethernet controller which is connected to the backplane via a x4 PCI Express link and supports the IEEE 802.3x standard. Each interface supports a data transfer rate of 1 Gbit/s if all interfaces are used simultaneously. Two LEDs show the link and activity status of every interface. Rugged Environments The G211F is designed for extended operating temperature and prepared for conformal coating for use in harsh and mobile environments. Four independent optical transceiver channels 1000BASE-SX Intel i82580 Server Chipset with support for 8 virtual machines Fully integrated to comply with IEEE802.3x 500 V isolation voltage -40 °C to +85 °C (without transceivers) PICMG CPCI-S.0 CompactPCI Serial peripheral card
G211X Quad Gigabit Ethernet Interface Board, M12-X 3U CompactPCI Serial The G211X quad Ethernet interface is a rugged single Eurocard CompactPCI Serial peripheral board. Quad Gigabit Ethernet Board The G211X quad Ethernet interface is a rugged single Eurocard CompactPCI Serial peripheral board. It can be used in combination with a CompactPCI Serial or CompactPCI PlusIO CPU board in a CompactPCI Serial or hybrid system. Future-Proof Front Connectors It provides four Gigabit Ethernet interfaces at the front panel which can be accessed on four M12 X-coded connectors making it especially suited for applications in harsh environments. All four interfaces are controlled by one Ethernet controller which is connected to the backplane via a x4 PCI Express link and supports the IEEE 802.3x standard. Each interface supports a data transfer rate of 1 Gbit/s, even if all interfaces are used simultaneously. Two LEDs show the link and activity status of every interface. Perfect for Railway Applications The G211X is designed for the extended operating temperature and prepared for conformal coating for use in harsh and mobile environments, in particular for rolling stock applications. Four 10/100/1000BASE-T Ethernet channels Intel I350 Ethernet Controller with support for 8 virtual machines Full-duplex or half-duplex M12 X-coded connectors Fully integrated to comply with IEEE802.3u 500 V isolation voltage -40 °C to +85 °C PICMG CPCI-S.0 CompactPCI Serial peripheral card
D134C PC/104 CAN Interface Dual Active/Passive CAN Interface The D134C is a multi-purpose CAN interface on a PC/104 footprint supporting all CAN operating modes and baud rates. It is available in two configurations: Passive CAN interface with a CAN controller. Active CAN interface including arbitrary CAN communication stacks. It is designed for the harsh traction environment (-40°C to 70°C) and is fully compliant to the EN 50155 / EN 50121 standard. CAN 2.0 CANOpen J1939 PC/104 UART Emulation
D114L PC/104 MVB Interface Cost optimized MVB Interface The D114L board series is an interface between railway vehicle equipment and the MVB Multifunction Vehicle Bus via "Process Data" communication. The D114L is cost optimized to applications with equal or less than 16 Process Data ports. All MVB physical layers are supported (ESD+, EMD, OGF) and it fully supports MVB line redundancy. The "UART Emulation" interface allows MVB communication without the need for a real time operating system. Hardware integration is very easy (8 registers and 8-bit access are needed, only). The Platform is designed for harsh traction environment and is fully compliant to the EN 50155 standard. EMD / ESD+ PD 16 / MD PC/104 Easy-to-use UART Emulation Galvanic Isolation OGF Interface
D113 PC/104 MVB Interface Multipurpose MVB Interface Card for Railway Systems MVB Interface with Flexible Configuration The D113 is a multipurpose MVB interface card designed in a PC/104 form factor. It provides full support for the Multifunction Vehicle Bus (MVB) and complies with the TCN standard IEC 61375-3-1 up to class 4, making it suitable for a wide range of railway control and communication applications. The D113 is available in two functional configurations: process data only or process and message data; each optionally extendable with a bus administrator. MVB Controller At its core, the D113 integrates duagon's MVB Controller (DMC) implemented in an FPGA, supporting up to 4096 process data ports. The process and message data configuration includes a CPU that runs the message data stack directly on the module, offloading communication tasks from the host and reducing host CPU load compared to ASIC-based MVB interface solutions. In process data only configuration, the MVB interface is controlled directly by the host. Easy Integration into Host System To simplify system integration, the D113 offers a standardized PC/104 host interface and a wide range of hardware options, including MVB physical layer variants (ESD+, EMD), connector types, and host interface configurations. This allows the D113 to be tailored to specific system requirements. Together with duagon's multi-card host driver kit, including optimized process data drivers and application examples, the D113 can be quickly and efficiently integrated into new or existing host systems. For Rolling Stock Environments Designed for harsh rolling stock environments, the D113 meets railway requirements for temperature, humidity, vibration, and EMC. It operates reliably from –40 °C to +85 °C, features conformal coating against humidity, and provides enhanced EMI and vibration robustness in accordance with EN 50155, EN 50121, and EN 61373. Standardized PC/104 form factor for fast and proven system integration Wide range of connector and hardware options Support for MVB devices up to class 4, including bus administrator functionality, process and message data Fully compliant with EN 50155 and IEC 61375 –40 °C to +85 °C operating temperature
GE1 4-Port Gigabit Copper Ethernet Line Card with PoE 3U CompactPCI Serial The GE1 is a 3U Gigabit Ethernet line card, with optional PoE support, implemented as a CompactPCI Serial board. It occupies one peripheral slot using a 4 HP front panel with four Gigabit Ethernet ports on RJ45 connectors. Alternatively, the GE1 can be supplied with four M12 connectors on the front panel (X-coded variants in preparation) The GE1 is a 3U Gigabit Ethernet line card, with optional PoE support, implemented as a CompactPCI Serial board. It occupies one peripheral slot using a 4 HP front panel with four Gigabit Ethernet ports on RJ45 connectors. Alternatively, the GE1 can be supplied with four M12 connectors on the front panel (X-coded variants in preparation). The GE1 is designed to work in combination with various Ethernet switches, routers and CPU boards available from duagon, including the G101 CompactPCI Serial managed industrial Ethernet switch. A special backplane is required which is available from duagon. The GE1 features four connectors on the front panel, which can also be used to create 4 ports of copper Gigabit Ethernet, and one Gigabit Ethernet connection directly to the backplane. In addition, the card can act as Power over Ethernet (PoE) Power Sourcing Equipment (PSE), supplying other devices on all ports with power. Each interface supports a data transfer rate of 1 Gbit/s, and provides two LEDs to indicate the link and activity status. The GE1 operates with a primary voltage supply of +12 V, which is provided via the rear CompactPCI serial connector. All additional required voltages are generated onboard. It is fully compliant with the EN 50155 railway standard, qualified for a -40 to +85°C operation temperature and ready for coating. 4 Gigabit Ethernet on RJ45 connectors (M12 optional) Power over Ethernet (PoE+) PSE (all ports) LEDs for link and activity status -40°C to +85°C EN 50155 class Tx (railways) PICMG CPCI-S.0 CompactPCI Serial peripheral card (limited mechanical compliance) IEEE 1588v2 supported (together with G101)
F26L Embedded Single Board Computer with Intel Atom Processor E3900 Series 3U CompactPCI PlusIO The F26L is an extremely low-power x86 SBC for industrial automation and railway transportation, featuring an Intel embedded processor with 2- and 4-core E3930, E3940 and E3950 processors. The CPU card is compliant with the PICMG 2.30 standard and as such a perfect migration path from CompactPCI to CompactPCI Serial. Low-Power Intel Atom CPU The F26L low-power CPU board is a member of the scalable family of Intel CPU boards which ensures future-safety and long-term availability. It is equipped with an Intel Atom Processor E3900 Series dual-core or quad-core System-on-a-Chip (SoC). Due to the low power architecture on the Intel Atom processor, the CPU card has a total power consumption of max. 6.5 Watts to 12 Watts, while having a clock frequency of up to 1.6 GHz. An excellent graphics performance, thermal supervision of the processor and a watchdog for the operating system top off the functionality of the F26L. Furthermore, a Trusted Platform Module is assembled for security purposes. Designed for Extreme Temperatures The CompactPCI PlusIO board has been designed for applications with extreme temperatures, where high reliability and long-term availability are essential requirements. This kind of application is common in the rail market, in industrial automation and in the power and energy sector, for example. To fulfill these extreme temperature requirements, the F26L has been equipped with a specially outlined heat sink, which efficiently takes away the heat from the board. CompactPCI PlusIO (PICMG 2.30) The F26L supports the CompactPCI PlusIO (PICMG 2.30) specification, meaning it can be used in a hybrid system for control of both CompactPCI and CompactPCI Serial peripheral boards. Compliant to the standard, four USB 2.0, four PCI Express x1 as well as two Gigabit Ethernet interfaces are accessible on the J2 rear I/O connector. Versatile Front I/O The standard I/O available at the front panel of the F26L includes VGA, two Gigabit Ethernet and two USB 3.2 Gen 1x1 ports. The F26L can be extended by different side cards. Additional functions include a variety of different UARTs or another four USBs, SATA for hard disk connection and HD audio. Linux and Windows Support The F26L operates in Windows 10 and Linux environments as well as under real-time operating systems that support Intel's multi-core architecture. The AMI UEFI BIOS was specially designed for embedded system applications. Long-Term Availability Long-term availability ensures an extended product life and future-safety. Intel E3900 series CPU with up to four cores Up to 8 GB DDR3 RAM soldered, ECC For CompactPCI 2.0 systems or CompactPCI PlusIO 2.30 hybrid systems (2.0 and CPCI-S.0) CPU TDP 6.5 W to 12 W Front I/O: 2 Gb Ethernet, 2 USB 3.2 Gen 1x1, 1 VGA Rear I/O: 2 Gb Ethernet, 4 PCIe x1, 4 USB 2.0 microSD card and mSATA slots Trusted Platform Module (TPM) Side card connector for high flexibility and interface extensions Up to -40 °C to +85 °C
PX5 USB HID to Stereo Audio Interface PCI Express Mini Card The PX5 is a PCI Express Mini Card providing an industry-grade USB HID to stereo audio interface. Analog Audio Interface The PX5 is a PCI Express Mini Card providing an industry-grade USB HID to analog audio interface. It supports one differential stereo audio IN and one differential stereo audio OUT channel at line level. Rugged Design for Rail and Aerospace Thanks to its standardized form factor the PX5 can be used as an audio extension for CompactPCI and CompactPCI Serial systems as well as box and panel PCs. Its rugged and compact design makes it especially suitable for the rail and aerospace markets, for example for ELA systems, in-flight and rolling stock entertainment systems, cockpit-to-passenger communication in planes, inter-phone or intercom systems. PCI Express Mini Card form factor USB interface for maximum compatibility HID interface to operating system 1 stereo input and 1 stereo output Differential line inputs and outputs Designed for cable lengths of up to 150 m -40°C to +85°C
PX1N GLONASS & GPS Interface PCI Express Mini Card The PX1N is a PCI Express Mini Card providing a GNSS receiver with GLONASS and GPS functionality and can be used in 19" systems, box PCs and display computers. It supports active or passive antennas, which can be connected to an U.FL connector. The received antenna signals are sent to the host via USB. Provides GLONASS and GPS functionality The PX1N is a PCI Express Mini Card providing a GNSS receiver with GLONASS and GPS functionality and can be used in 19" systems, box PCs and display computers. It supports active or passive antennas, which can be connected to an U.FL connector. The received antenna signals are sent to the host via USB. Supports global satellite navigation systems The PX1N supports concurrent reception of GPS/QZSS, GLONASS, BeiDou and is Galileo-ready. Uses dead reckoning functions for high accuracy positioning The GNSS module provides a 3-axis accelerometer and gyroscope sensors for dead reckoning functions, which enable accurate positioning. Various Satellite-Based Augmentation Systems (SBAS) are also supported. The PX1N provides communication information compliant to the NMEA 0183 protocol. Multi GNSS support Automotive Dead Reckoning (ADR) Satellite Based Augmentation System (SBAS) -160 dBm tracking sensitivity Active/passive antenna connection via U.FL Compatible with NMEA 0183 -40 °C to +85 °C