M35N
Mezzanine Card with 8/16 Analog Inputs, 14 Bits
Hauptmerkmale
- 8/16 current or voltage inputs
- 14 bits resolution
- 7.8 µs acquisition/conversion time
- Precision better than 0.1 %
- Unipolar/bipolar software-selectable
- Autoincrement of channel number
- External triggering
- Optical isolation (500 V)
- -40 °C to +85 °C versions
The mezzanine card M35N is a 14-bit analog M-Module for a wide range of standard input requirements such as 16 channels single-ended voltage or current and 8 channels differential voltage or current. The isolated supply voltages are generated by an onboard DC/DC converter, which is also usable in the extended temperature range of -40 to +85°C. A fast A/D converter and auto-incrementation of the multiplexer channel make the M-Module ideal for fast sampling. The complete acquisition time of one channel of an M35N is 7.8µs and the precision is better than 0.1%. The M35N features totally automatic adjustment of each channel and each input range.
The M35N is based on the M-Module ANSI mezzanine standard. It can be used as an I/O extension in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC. Appropriate M-Module carrier cards in 3U, 6U and other formats are available from duagon or other manufacturers.
Zugehörige Produkte
- 14 bits @ 7.8µs
- Precision: depends on M-Module settings; see user manual
- Noise: depends on M-Module settings; see user manual
- Programmable gain factor of 1, 2, 4 or 8 (factor 16 by hardware jumpering)
- Software-selectable unipolar or bipolar operation
- Sample and hold
- Autoincrement of channel number
- Voltage or Current Inputs
- 16 analog inputs, single-ended
- High input voltage tolerance
- Cross-talk less than 60db
- Low-pass filter 1kHz
- Voltage Measurement
- Voltage max.: ±15V
- Voltage full scale: ±10V
- Input resistance: 100 kOhm, ±10%
- Current Measurement
- Current max.: ±25mA
- Current full scale: ±20mA, UA = ±1.25V
- Load resistance: 62.5 Ohm, ±0.1%
- Voltage or Current Inputs
- 8 analog inputs, differential
- High common mode range ±200V
- Cross-talk less than 60db
- Low-pass filter 3kHz
- Voltage Measurement
- Voltage max.: ±200V (common mode)
- Voltage full scale: ±10V
- Input resistance: 400 kOhm typ.
- Current Measurement
- Current max.: ±25mA
- Voltage max. to IGND: ±200V
- Input resistance: 62.5 Ohm, ±0.1%
- External trigger (isolated, rising-edge sensitive)
- External binary input
- Analog I/O
- 8/16 × analog input, isolated, D-Sub, 25-pin, receptacle
- 8/16 × analog input, isolated, board to board
- M-Module
- 1 × A08/D16/IDENT/INTA, board to board
- Isolation voltage:
- 500V DC between isolated side and digital side
- 180V DC between the channels
- Voltage between the connector shield and isolated ground is limited to 180V using a varistor; AC coupling between connector shield and isolated ground through 47nF capacitor
- Supply voltages/power consumption:
- +5V (4.85V..5.25V), 300mA
- MTBF: 198,000h @ 40°C (derived from MIL-HDBK-217F)
- Dimensions: conforming to M-Module Standard
- Weight: 84g (incl. adapter)
- Temperature range (operation):
- 0..+60°C or -45..+85°C
- Airflow: min. 10m³/h
- Temperature range (storage): -40..+85°C
- Relative humidity (operation): max. 95% non-condensing
- Relative humidity (storage): max. 95% non-condensing
- Altitude: -300m to + 3,000m
- Shock: 15g/11ms
- Bump: 10g/16ms
- Vibration (sinusoidal): 2g/10..150Hz
- Modular Driver Interface System (MDIS for Windows, Linux, VxWorks, QNX)
- For more information on supported operating system versions and drivers see Software.




