G503
Dual SATA HDD/SSD Shuttle & RAID Controller
Hauptmerkmale
- Mass storage drive shuttle
- Two 2.5" SATA drive slots
- RAID 0 1 and JBOD in hardware
- 2 ms HDD power hold-up time
- -40 °C to +85 °C
- PICMG CPCI-S.0 CompactPCI Serial peripheral card (limited mechanical compliance)
2.5" HDD or SSD
The G503 is a CompactPCI Serial drive carrier board for use in a system environment with an x86 processor. It is designed to carry two 2.5" SATA mass storage drives.
SATA RAID Controller
The HDD or SSD are controlled by an on-board SATA RAID Controller supporting RAID modes 0 1 and JBOD as well as hot plug capability. The RAID level can be set using a hex switch on the board.
The G503 can be used to supplement the RAID functionality provided by the CPU board in order to implement data storage systems with high reliability and capacity.
Front Panel Status LEDs
The unit's front panel features six LEDs signalizing board status (Power Locate Activity Hot-Plug/Error and Eject).
For Mission Critical Tasks and Harsh Environments
The board supports a 2 ms HDD power hold-up time for protecting the stored data in case of a power failure which makes it applicable also for mission-critical tasks.
In addition to industrial applications the G503 is also suitable for railway applications.
- Serial ATA (SATA)
- Two ports for two onboard 2.5" hard disk drives or solid state drives
- SATA revision 3.x
- Onboard SATA RAID controller supporting RAID 0, 1 and JBOD
- Hot-swap support (depending on CPU board)
- Power LED
- Locate LED
- Two activity LEDs
- Hot-plug/Error LED
- Eject LED
- Hot-swap switch (eject button)
- Compliance with CompactPCI Serial PICMG CPCI-S.0 Specification
- Peripheral slot
- Host connection:
- One SATA revision 3.x uplink
- One SGPIO
- Supply voltage
- +12 V (9 to 16 V), or
- +12 V (5 to 16 V) (on request)
- Power consumption: depending on HDD/SSD
- Dimensions: Wide single Eurocard, 111.7 mm x 160 mm
- HDD/SSD height: 9 mm max.
- Weight: 125 g (without HDD/SSD)
- Temperature range (operation):
- -40 °C to +85 °C (depending on HDD or SSD; please refer to the HDD/SSD specifications for possible limits)
- Airflow: min. 1.5 m/s
- Temperature range (storage): -40 °C to +85 °C
- Cooling concept: Air-cooled or conduction-cooled in duagon CCA frame
- Relative humidity (operation): max. 95% non-condensing
- Relative humidity (storage): max. 95% non-condensing
- Altitude: -300 m to + 3000 m
- Shock: 15 g/11 ms
- Bump: 10 g/16 ms
- Vibration (sinusoidal): 2 g/10 Hz to 150 Hz